Cisco Systems 6500 manual Dpd

Chapter 2 Commands for the Catalyst 6500 Series Switch WebVPN Module

show webvpn stats

Socket statistics:
Sockets in use			:	2	Sock	Usr Blocks in use	: 2
Sock Data Buffers in use :				0	Sock	Buf desc in use	: 0
Select timers in use			:	2	Sock	Select Timeouts	: 0
Sock Tx Blocked			:	49	Sock	Tx Unblocked	: 49
Sock Rx Blocked			:	0	Sock	Rx Unblocked	: 0
Sock UDP		Connects	:	0	Sock	UDP Disconnects	: 0
Sock Premature Close			:	0	Sock	Pipe Errors	: 5
Port Forward		statistics:
Client					Server
in pkts			:	0	out pkts		: 0
in bytes			:	0	out bytes		: 0
out	pkts		:	0	in pkts		: 0
out	bytes		:	0	in bytes		: 0
Tunnel Statistics:
Active connections			:	0
Peak connections			:	1	Peak	time	: 5d16h
Connect succeed			:	6	Connect failed		: 0
Reconnect succeed			:	1	Reconnect failed		: 0
DPD	timeout		:	0
Client					Server
in	CSTP	frames	:	23098	out IP pkts		: 23093
in	CSTP	data	:	23093
in	CSTP	control	:	5
in	CSTP	bytes	:	4956832	out IP bytes		: 4771852
out	CSTP	frames	:	32086	in	IP pkts	: 32084
out	CSTP	data	:	32084
out	CSTP	control	:	2
out	CSTP	bytes	:	16136526	in	IP bytes	: 16512477

webvpn#

Most of the counters are self-explanatory. The following descriptions are for the counters that are not self-explanatory:

•User session statistics:

– Terminated user sessions—Number of sessions that were logged out from the time last clear keyword was executed.

–Session alloc failures—Indicates that the system is running out of memory.

–Authentication failures—AAA responded with failure status for given username or password .

–VPN session timeout—Number of sessions that were cleared because of session timeout expiry.

–VPN idle timeout—Number of sessions that were cleared because of idle timeout expiry.

– User cleared vpn sessions—Number of sessions that were cleared because of the clear webvpn session command.

–Exceeded ctx user limit—Number of sessions that were rejected because of exceeding max-users limit configured under context.

–Exceeded total user limit—Number of sessions that were rejected because of exceeding the system user limit (currently 8000).

Catalyst 6500 Series Switch WebVPN Module Command Reference—Release 1.1

2-66 OL-7310-01