Cisco Systems 6500 manual Crypto pki profile enrollment label

Chapter 2 Commands for the Catalyst 6500 Series Switch WebVPN Module

crypto pki profile enrollment

crypto pki profile enrollment

To define an enrollment profile, use the crypto pki profile enrollment command in global configuration mode. To delete all information associated with this enrollment profile, use the no form of this command.

crypto pki profile enrollment label

Syntax Description	label	Certificate enrollment profile tag.
Defaults	This command has no default settings.

Command Modes

Command History

Global configuration

Release	Modification
WebVPN Module	Support for this command was introduced on the Catalyst 6500 series
Release 1.1	switches.

Usage Guidelines After entering the crypto pki profile enrollment command, you can use any of the following commands to define the profile parameters:

•authentication command—Specifies the HTTP command that is sent to the certification authority (CA) for authentication.

•authentication terminal—Specifies manual cut-and-paste certificate authentication requests.

•authentication url—Specifies the URL of the CA server to which to send authentication requests.

•enrollment command—Specifies the HTTP command that is sent to the CA for enrollment.

•enrollment terminal—Specifies manual cut-and-paste certificate enrollment.

•enrollment url—Specifies the URL of the CA server to which to send enrollment requests.

•parameter—Specifies parameters for an enrollment profile. This command can be used only if the authentication command or the enrollment command is used.

Note The authentication url, enrollment url, authentication terminal, and enrollment terminal commands allow you to specify different methods for certificate authentication and enrollment, such as TFTP authentication and manual enrollment.

Examples This example shows how to specify the timeout in seconds for each request:

webvpn(config)# crypto pki profile enrollment test

webvpn(ca-profile-enroll)#

Catalyst 6500 Series Switch WebVPN Module Command Reference—Release 1.1

OL-7310-01 2-25