Cisco Systems 6500 manual Webvpn context vpn-name No webvpn context vpn-name

Chapter 2 Commands for the Catalyst 6500 Series Switch WebVPN Module

webvpn context

webvpn context

To enter the WebVPN context submode and define the virtual WebVPN context, use the webvpn context command. Use the no form of this command to remove any commands that you have entered in the WebVPN subcommand mode from the configuration.

webvpn context [vpn-name]

no webvpn context vpn-name

Syntax Description	vpn-name	(Optional) Name of the WebVPN instance.
Defaults	This command has no default settings.

Command Modes

Command History

Global configuration

Release	Modification
WebVPN Module	Support for this command was introduced on the Catalyst 6500 series
Release 1.1	switches.

Usage Guidelines The vpn-nameargument is case-sensitive.

After you enter the webvpn context command, the prompt changes to the following:

webvpn(config-webvpn-context)#

After you enter the context submode, there are commands available to configure the context services. Table 2-7lists the virtual context submode commands.

Table 2-7 Virtual WebVPN Context Submode Commands

Command	Purpose and Guidelines	Defaults
aaa authentication {{domain domain-list}	Specifies AAA configuration parameters for context.
{list listname}}	• domain domain-list—Specifies the name of the
	domain used for authentication.
	• list listname—Specifies the name of the
	authentication list.
default-group-policy default-policy-name	Specifies the default group policy that the virtual
	WebVPN context instance uses. See the policy
	group command for information on group policies.
exit	Exits from the context submode and returns to the
	global configuration mode.

Catalyst 6500 Series Switch WebVPN Module Command Reference—Release 1.1

2-78 OL-7310-01