Cisco Systems 6500 manual Crypto pki export pkcs12

Chapter 2 Commands for the Catalyst 6500 Series Switch WebVPN Module

crypto pki export pkcs12

crypto pki export pkcs12

To export a PKCS12 file from the WebVPN Services Module, use the crypto pki export pkcs12 command.

crypto pki export trustpoint_label pkcs12 file_system [pkcs12_filename] pass_phrase

Syntax Description	trustpoint_label	Specifies the trustpoint label.
	file_system	Specifies the file system. Valid values for file_system are as follows
		archive:—Exports to archive: file system.
		cns:—Exports to cns: file system.
		flash:—Exports to flash: file system.
		ftp:—Exports to ftp: file system.
		http:—Exports to http: file system.
		https:—Exports to https: file system.
		null:—Exports to null: file system.
		nvram:—Exports to nvram: file system.
		rcp:—Exports to rcp: file system.
		scp:—Exports to scp: file system.
		system:—Exports to system: file system.
		terminal—Outputs the PKCS12 file to the terminal.
		tftp:—Exports to tftp: file system.
	pkcs12_filename	(Optional) Specifies the name of the PKCS12 file to import.
	pass_phrase	Specifies the pass phrase of the PKCS12 file.
Defaults	This command has no default settings.

Command Modes

Command History

Global configuration

Release	Modification
WebVPN Module	Support for this command was introduced on the Catalyst 6500 series
Release 1.1	switches.

Usage Guidelines Imported key pairs cannot be exported.

If you are using SSH, we recommend using SCP (secure file transfer) when exporting a PKCS12 file. SCP authenticates the host and encrypts the transfer session.

Catalyst 6500 Series Switch WebVPN Module Command Reference—Release 1.1

OL-7310-01 2-19