Chapter 2 Commands for the Catalyst 6500 Series Switch WebVPN Module

crypto pki trustpoint

crypto pki trustpoint

To enter the configuration submode for the certificate-authority trustpoint and define the certificate-authority trustpoint, use the crypto pki trustpoint command. Use the no form of this command to remove any commands that you have entered in the WebVPN subcommand mode from the configuration.

crypto pki trustpoint trustpoint-label

no crypto pki trustpoint trustpoint-label

Syntax Description

 

trustpoint-label

(Optional) Name of the trustpoint label.

 

 

 

 

Defaults

 

This command has no default settings.

Command Modes

Command History

Global configuration

Release

Modification

WebVPN Module

Support for this command was introduced on the Catalyst 6500 series

Release 1.1

switches.

 

 

Usage Guidelines The trustpoint-labelargument is case-sensitive.

After you enter the crypto pki trustpoint command, the prompt changes to the following:

webvpn(ca-trustpoint)#

After you enter the ca-trustpoint submode, there are commands available to configure the CA trustpoint. Table 2-1lists the ca-trustpoint submode commands.

Catalyst 6500 Series Switch WebVPN Module Command Reference—Release 1.1

2-26

OL-7310-01

 

 

Page 26
Image 26
Cisco Systems 6500 manual Crypto pki trustpoint