Chapter 2 Commands for the Catalyst 6500 Series Switch WebVPN Module

webvpn policy tcp

webvpn policy tcp

To enter the proxy policy TCP configuration submode, use the webvpn policy tcp command. In proxy-policy TCP configuration submode, you can define the TCP policy templates.

webvpn policy tcp tcp-policy-name

Syntax Description

 

tcp-policy-name

TCP policy name.

 

 

 

 

Defaults

 

The defaults are as follows:

buffer-share rx is 32768 bytes.

buffer-share tx is 32768 bytes.

delayed-ack-threshold is 2 packets.

delay-ack-timeoutis 200 milliseconds.

mss is 1460 bytes.

nagle is enabled.

timeout inactivity is 600 seconds.

timeout fin-wait is 600 seconds.

timeout syn is 75 seconds.

timeout reassembly is 60 seconds.

tos carryover is disabled.

Command Modes

Command History

Global configuration

Release

Modification

WebVPN Module

Support for this command was introduced on the Catalyst 6500 series

Release 1.1

switches.

 

 

Usage Guidelines After you define the TCP policy, you can associate the TCP policy with a proxy server using the proxy-policy TCP configuration submode commands.

Each proxy-policy TCP configuration submode command is entered on its own line.

Table 2-11lists the commands that are available in proxy-policy TCP configuration submode.

Table 2-11 Proxy-policy TCP Configuration Submode Command Descriptions

default

exit

Sets a command to its default settings.

Exits from proxy-service configuration submode.

 

Catalyst 6500 Series Switch WebVPN Module Command Reference—Release 1.1

2-108

OL-7310-01

Page 108
Image 108
Cisco Systems 6500 manual Webvpn policy tcp tcp-policy-name, Timeout syn is 75 seconds, Default Exit