Chapter 2 Commands for the Catalyst 6500 Series Switch WebVPN Module
show webvpn context
show webvpn context
To display information about a specific context, use the show webvpn context command.
show webvpn context name
Syntax Description |
| name | Specifies the name of the context. |
|
|
|
|
Defaults |
| This command has no default settings. | |
Command Modes
Command History
EXEC
Release | Modification |
WebVPN Module | Support for this command was introduced on the Catalyst 6500 series |
Release 1.1 | switches. |
|
|
Examples | This example shows how to collect information about the |
| webvpn# show web context tunnel |
| Admin Status: up |
| Operation Status: up |
| TCP Policy not configured |
| SSL Policy not configured |
| Certificate authentication type: peer certificate is always accepted |
| AAA Authentication List: webvpn |
| AAA Authentication Domain not configured |
| Default Group Policy: tunnel |
| Associated WebVPN Gateway: s2 |
| Domain Name and Virtual Host not configured |
| Maximum Users Allowed: 2560 (default) |
| NAT Address Range: |
| VRF Name not configured |
| webvpn# |
Catalyst 6500 Series Switch WebVPN Module Command
|
| ||
|
|
