Cisco Systems 6500 manual Ca-pool- CA Pool, Cert- Certificate management, Events- Events

Chapter 2 Commands for the Catalyst 6500 Series Switch WebVPN Module

debug webvpn

The platform pc includes the following values:

–module [module]—Module to be debugged The platform pki includes the following values:

–auth— Certificate authentication and authorization

–ca-pool— CA Pool

–cert— Certificate management

–events— Events

–history— Certificate history

–ipc— IPC messages and buffers

–key— Key management

The platform remote includes the following values:

–loop count [module [module]]—Remote debug. Valid values for count are from 1 to 65535.

–module [module]—Module to be debugged

The platform ssl keyword includes the following values:

–alert [module [module]]—SSL alert events

–error [module [module]]—SSL error events

–handshake [module [module]]—SSL handshake events

–module [module]—Module to be debugged

–pkt [module [module]]—Debugs the received and transmitted SSL packets

Note Use the TCP debug commands only to troubleshoot basic connectivity issues under little or no load conditions (for instance, when no connection is being established to the virtual server or real server).

If you run TCP debug commands, the TCP module displays large amounts of debug information on the console, which can significantly slow down module performance. Slow module performance can lead to delayed processing of TCP connection timers, packets, and state transitions.

The platform tcp keyword includes the following values:

–events [module [module]]—Debugs the TCP events.

–module [module]—Module to be debugged.

–pkt [module [module]]—Debugs the received and transmitted TCP packets.

–state [module [module]]—Debugs the TCP states.

–timers [module [module]]—Debugs the TCP timers.

The platform tunnel keyword includes the following values:

–hash—Tunnel hash entry

–trace—Trace packets for tunnel connection

Catalyst 6500 Series Switch WebVPN Module Command Reference—Release 1.1

OL-7310-01 2-33