Chapter 2 Commands for the Catalyst 6500 Series Switch WebVPN Module
show webvpn gateway
show webvpn gateway
To display gateway information, use the show webvpn gateway command.
show webvpn gateway [name]
Syntax Description |
| name | (Optional) Name of the gateway. |
|
|
|
|
Defaults |
| This command has no default settings. | |
Command Modes
Command History
EXEC
Release | Modification |
WebVPN Module | Support for this command was introduced on the Catalyst 6500 series |
Release 1.1 | switches. |
|
|
Examples | This example shows how to display information for all gateways: | ||
| webvpn# show webvpn gateway |
|
|
| Gateway Name | Admin | Operation |
| |||
| s1 | up | up |
| s2 | up | up |
| gateway1 | down | down |
| tunnel | down | down |
This example shows how to display information for a specific gateway:
webvpn# show webvpn gateway s1 Admin Status: up
Operation Status: up
IP: 10.1.2.140, port: 443 TCP Policy not configured SSL Policy not configured SSL Trustpoint: tp1
Certificate chain for new connections: Certificate:
Key Label: tp1,
Key Timestamp: 12:09:27 UTC Dec 25 2004
Serial Number: 0FE5 Root CA Certificate:
Serial Number: 01
Catalyst 6500 Series Switch WebVPN Module Command
| ||
|
