Cisco Systems 6500 manual Gateway gateway-namedomain-name, Inservice, Login-message string

Chapter 2 Commands for the Catalyst 6500 Series Switch WebVPN Module

webvpn context

Table 2-7 Virtual WebVPN Context Submode Commands

Command		Purpose and Guidelines	Defaults
gateway gateway-name{{domain-name		Specifies the corresponding virtual gateway instance	Virtualization is
domain-name} {virtual-hosthostname}}		configured on the secure gateway and the mapping	performed
		methods (for example, IP address, URL, and domain	through a unique
		name) as follows:	IP address.
		• gateway-name—Name of the virtual gateway
		configured on the system.
		• domain-namedomain-name—(Optional) Maps
		to a specific domain name. The domain-name
		argument is a ASCII string, which is used to
		specify a corporate-specific domain name (for
		example, cisco.com) for the virtual WebVPN
		instance.
		• virtual-hosthostname—(Optional) Maps to a
		specific virtual host.
inservice		Brings context to inservice.
login-message string		Specifies the text that prompts the user to login.	string is Please
no login-message		Limited to 255 characters. Use the no form of this	enter your
		command to return to the default setting.	username and
			password.
logo [file filename none]		Specifies the custom logo image that is displayed on
		the login and home pages.
		file filename—(Optional) Specifies the filename of a
		file that is uploaded by the administrator to the
		security gateway.
nat-addressstart-address end-address		Specifies the NAT addresses to be used in opening a
{netmask netmask}		server connection. The addresses specified in the
		nat-addresscommand must match one of the
		subnets configured on the WebVPN subinterfaces.
		• start-address—Starting IP address that defines
		the range of addresses in the address pool.
		• end-address—Ending IP address that defines
		the range of addresses in the address pool.
		• netmask netmask—Network mask that
		indicates which address bits belong to the
		network and subnetwork fields and which bits
		belong to the host field. Specify the netmask of
		the network to which the pool addresses belong.
nbns-list name		Enters nbmslist submode and allows you to create
		the NBNS list name. See the nbns-listcommand for
		information on configuring the NBNS list.
password-prompt prompt		Configures the initial WebVPN login password	prompt is
		prompt. The maximum length of prompt is 16	Password:
		characters.
	Catalyst 6500 Series Switch WebVPN Module Command Reference—Release 1.1
OL-7310-01				2-79