Chapter 2 Commands for the Catalyst 6500 Series Switch WebVPN Module
show webvpn session
show webvpn session
To display information about the WebVPN session, use the show webvpn session command.
show webvpn session {context {name all} user name context {name all}}
Syntax Description |
| context name | Specifies the context name. |
|
| user name | Specifies the user name. |
|
|
| |
|
|
|
|
Defaults |
| This command has no default settings. | |
Command Modes
Command History
EXEC
Release | Modification |
WebVPN Module | Support for this command was introduced on the Catalyst 6500 series |
Release 1.1 | switches. |
|
|
Examples | This example shows how to display session information about the specified context: | ||||
| webvpn# show webvpn session context c1 |
|
|
| |
| WebVPN context name: c1 |
|
|
| |
| Client_Login_Name Client_IP_Address No_of_Connections Created | Last_Used | |||
| user1 | 10.2.1.220 | 2 | 04:47:16 | 00:01:26 |
| user2 | 10.2.1.221 | 2 | 04:48:36 | 00:01:56 |
This example shows how to display session information for a specific user:
webvpn# show webvpn session user user1 context c1
WebVPN user name = user1 ; IP address = 10.2.1.220 ; context = c1 No of connections: 2
Created 04:50:21,
Client Port: 2503, Server IP Addr: 10.102.31.9, Server Port: 80
Client Port: 2504 User Policy Parameters
Group name = test Group Policy Parameters
url list name = "Cisco test URL list" idle timeout = 2100 sec
session timeout = 43200 sec
port forward name = "Mail Servers" dpd client timeout = 300 sec
dpd gateway timeout = 300 sec
keep sslvpn client installed = disabled rekey interval = 3600 sec
rekey method = ssl
lease duration = 43200 sec
Catalyst 6500 Series Switch WebVPN Module Command
|
| ||
|
|
