Setup menus (continued)
Loading user files
The contents of the USER2, USER3, USER4 or USER5 file can be copied (loaded) into the USER1 file. Also, the contents of the USER1 file can be copied (saved) into the USER2, USER3, USER4 or USER5 file.
5 Press the SET button.
The following message appears on the menu screen and counter display.
Menu screen
Load/save
USER 1 USER 2
Lock mode can be set
USER2 n USER1 OK? YES<PLAY>/NO<STOP>
Load/save
Load/save
Load/save
USER 3
USER 4
USER 5
Lock mode can be set
Lock mode can be set
Lock mode can be set
Counter display
1 Press the MENU (SHIFT+RECORDER).
2 Press the REW button or FF button while holding down the SHIFT button to select the USER1 file.
3 Turn the search dial to move the cursor (2) on the menu screen to No. A00 (LOAD).
MENU |
| ||
<USER1> | |||
804 | BLANK LINE | BLANK | |
2A00 | LOAD |
| USER2 |
A01 | SAVE |
| USER2 |
A02 | P.ON LOAD | OFF | |
END |
|
|
|
4 Turn the search dial while holding down the search button to select the user file whose contents are to be loaded into USER1.
The number of the user file selected in step 4 is displayed at .
6 Press the PLAY button.
The settings of the user file selected in step 4 are loaded, and the USER1 menu display appears. If the STOP button is pressed instead, the settings are not changed, and the USER1 menu display appears.
7 Turn the search dial to move the cursor (2) on the menu screen to a number other than No. A00 (LOAD) or No. A01 (SAVE).
8 Press the SET button. The USER1 settings are stored in the memory.
If the USER1 settings are not to be stored in the memory, do not press the SET button but press the MENU button instead.
36