Panasonic AJ-SD965 manual User menu, Basic

Setup menus (continued)

USER menu		<BASIC>
No./Item				Description
000	This sets the preroll time.
	The preroll time can be set from 0 to 15 seconds
P-ROLL TIME	in 1-second increments.
		0000	0s	<Note>
		:	:	When	the automatic	editing
		0005	5s	mode	[PREVIEW,	AUTO
		:	: EDIT] is set, the unit will not
		0015	15s operate if the preroll time is
				set to 0 seconds.
001	This selects the buttons on the front panel
	which can be operated when the REMOTE
LOCAL ENA	button is set to the remote mode (REMOTE
	lamp ON).
		0000	DIS :
		No buttons can be operated.
		0001	ST&EJ :
		Only the STOP and EJECT buttons can be
		operated.
		0002	ENA :
		All buttons except for the RECORDER and
		PLAYER buttons can be operated.
002	This selects the 12 or 24 hour display for the
	CTL counter.
TAPE TIMER
		0000	±12h : 12 hour display
		0001	24h : 24 hour display
003	This selects whether the remaining tape time
	and total tape length are to be displayed in
REMAIN SEL	the superimposed display of the VIDEO OUT
	3/SDI OUT 3 connector signals.
		0000	OFF : No display.
		0001	2L :
		The remaining tape time is displayed on the
		second line.
		0002	1L :
		The remaining tape time is displayed on the
		first line.
		0003	R/TTL :
		The remaining tape time is displayed on the
		first line, and the total tape length is displayed
		in the second line.
	<Notes>
	OWhen “2L” is selected, the remaining tape
		time is not displayed if “TIME” has been
		selected as the setup menu item No.008
		(DISPLAY SEL) setting.
	OWhen “R/TTL” is selected, the total tape
		length is not displayed if “TIME” has been
		selected as the setup menu item No.008
		(DISPLAY SEL) setting.

No./Item		Description
006	This selects whether or not to synchronize
	between two VTRs.
SYNCHRONIZE
	0000	OFF :
	No synchronization. The editing points
	deviate several frames, but editing can be
	started quickly.
	0001	ON :
	Synchronization. Allows for error-free editing.

008This selects what information is to be provided by the time code and other super

DISPLAY SEL displays output to the VIDEO OUT 3/SDI OUT 3 connector.

0000 TIME : Data only.

(The data indicates the value for whichever of CTL, TC or UB currently selected by the COUNTER button.)

0001 T&STA : Data and operation status.

0002 T&S&M : Data, operation status and mode.

0003 T&RT : Data and REC TIME

0004 T&YMD :

Data and REC DATE (year/month/day)

0005 T&MDY :

Data and REC DATE (month/day/year)

0006 T&DMY :

Data and REC DATE (day/month/year)

0007 T&UB :

Data and user bit.

However, when UB has been selected with the COUNTER button, the time code is displayed after the user bit.

0008 T&CTL :

Data and CTL data.

However, when CTL has been selected with the COUNTER button, the time code is displayed after the CTL data.

0009 T&T :

Data and time code.

0010 VITC:

The time code and user bit recorded in the

VAUX area are displayed.

<Notes>

OMode display:

DVCPRO 50 (50 Mbps) = DVCPRO_50,

DVCPRO (25 Mbps) = DVCPRO,

DV = DV, DVCAM = DVCAM

OAn error message appears if a warning or error has occurred when “T&S&M” has been selected as this setting.

OREC TIME and REC DATE are displayed during DV/DVCAM, playback only. With the DVCPRO50 (50 Mbps) or DVCPRO (25 Mbps) format, the operating mode is displayed.

The underlined items indicates the initial setting.

40