Specifications (continued)
[VIDEO]
$Video output connector
Analog component output:
BNCa3 (Y, PB, PR)
Y:1.0 V
Analog composite output:
BNCa3, video 1, video 2 (video/WFM selectable), video 3 (superimpose on/off)
SDI output:
BNCa3, SDI 1, SDI 2, SDI 3 (superimpose on/off), complies with
$Video signal adjustment
Video output gain:
±3 dB
Video output chroma gain:
±3 dB
Video output HUE (chroma phase):
±30°
Video output setup (black) level:
±100 mV (±14 IRE)
Video output sync phase:
±15 µsec
Video output SC phase:
More than ±180°
[AUDIO]
$Audio input connector
Analog input (CH1, CH2, CH3, CH4):
XLRa4, 600Ω/high impedance selectable (factory setting: high impedance),
Digital input (CH1/CH2, CH3/CH4):
BNCa2, AES/EBU format
SDI input:
BNCa2, active through, complies with
$Audio output connector
Analog output (CH1, CH2, CH3, CH4):
XLRa4, low impedance,
Digital output (CH1/CH2, CH3/CH4):
BNCa2, AES/EBU format, 75Ω, 1.0 ± 0.2 V
SDI output:
BNCa3, 75Ω, complies with
standard
Monitor output:
XLRa2, low impedance,
Headphones:
Stereo mini jack, 8Ω, variable level
[AUDIO]
$Digital audio
Sampling frequencies:
48 kHz (synchronous with video)
Quantizing:
16 bits
Frequency response:
20 Hz to 20 kHz ±1.0 dB (at the reference level)
Dynamic range:
Better than 90 dB (1 kHz, emphasis OFF, “A” weighted)
Distortion:
Less than 0.05% (1 kHz, emphasis OFF, reference level)
Crosstalk:
Less than
Wow & flutter:
Below measurable limit
Headroom:
20 dB
T1 = 50 µsec, T2 = 15 µsec (auto on/off)
$Cue track
Frequency response:
300 Hz to 6 kHz ±3.0 dB (DVCPRO50)
[Other Input/Output Connectors]
Time code input:
XLRa1, 0.5 V to 8.0 V
Time code output:
XLRa1, low impedance, 2.0 V ± 0.5 V
Parallel input/output:
Encoder remote:
D-sub 15-pin
Weight and dimensions when shown are approxlmately. Speclilcailons are subject to change without notice.
84