Panasonic AJ-SD965 manual Cc Rec, Wide Select

Setup menus (continued)

USER menu		<VIDEO>
No./Item			Description
623	For setting 7.5% setup processing to be
	performed on input and output signals in the
SETUP 50	DVCPRO50 (50 Mbps) mode.
	When the STOP button is pressed, operation is
	transferred to the sub-screen, and the setup
	level is set for each output. To return from the
	sub-screen, press the STOP button again.
	<Note>
	This setup menu is not displayed in the 625i
	system.
Sub-screen
00	This selects the 7.5% setup processing for
CMPST IN	the input composite signal.
		0000	THRU :
		The signal is recorded in its original form.
		0001	CUT :
		The signal is recorded with the 7.5% setup
		removed.
01	This selects the 7.5% setup processing for
CMPST OUT	the output composite signal.
		0000	THRU :
		The signal is output in its original form.
		0001	ADD :
		The signal is output with the 7.5% setup
		added.
	<Note>
	Bear in mind the setting for sub-screen item No.
	03 (CMPNT OUT) of setup menu item No. 623
	(SETUP 50).
02	This selects the 7.5% setup processing for
CMPNT IN	the input component signal.
		0000	THRU :
		The signal is recorded in its original form.
		0001	CUT :
		The signal is recorded with the 7.5% setup
		removed.
03	This selects the 7.5% setup processing for
CMPNT OUT	the output composite, component and serial
	(digital) signal.
		0000	THRU :
		The signal is output in its original form.
		0001	CUT :
		The signal is output with the 7.5% setup
		removed.
		0002	ADD :
		The signal is output with the 7.5% setup
		added.

No./Item		Description
624	For selecting whether to record the closed
	caption signals multiplexed on the input
CC REC	signals on the tape.
	0000	OFF :
	No closed caption signal is recorded.
	In addition, the EE output signals are blanked.
	0001	ON :
	When a closed caption signal is detected from
	the selected input signal, it can be recorded.
	<Notes>
	OIf 1394 signals have been selected as the
	input signals, the closed caption signals which
	have been multiplexed onto the input signals
	will be recorded on the tape regardless of the
	setting.
	OThis setup menu is not displayed in the 625i
	system.
645	This selects whether or not to record the
	wide-screen information on the tape.
WIDE SELECT
	0001	WIDE :
	The wide-screen information is recorded on
	the tape.
	0002 NORMAL :
	The wide-screen information is not recorded
	on the tape.
	<Notes>
	OIf 1394 has been selected as the input signals
	using the INPUT SELECT button, the wide-
	screen information on the input signals will be
	recorded regardless of this menu’s setting.
	OThe aspect ratio cannot be changed by this
	unit.

The underlined items indicates the initial setting.

53