Video output signals and servo reference signal (continued)
Servo reference signal
The REF VIDEO input signal or video input signal is selected as the servo reference signal.
As shown in the figure below, the signal is selected in accordance with the setup menu settings, VTR mode and availability of the video input signal.
<Notes>
Synchronization is determined as follows depending on the availability of the REF VIDEO input signal when “BB”, “CB100” or “CB75” has been selected as the setup menu No. 600 (INT SG) setting.
O When the REF VIDEO input signal is available: Synchronization with the REF VIDEO input signal
O When the REF VIDEO input signal is not available: Internal synchronization
Start
EXT | What is the |
|
|
| setup menu No. 304 (SERVO |
|
|
|
|
| |
| REF) setting? |
|
|
| AUTO/AUTO1 |
|
|
| Is the unit | YES | |
| in one of the editing modes? |
|
|
|
|
| |
| NO |
|
|
| Has the unit | YES | |
| been set to the recording |
|
|
|
|
| |
| mode? |
|
|
| NO |
|
|
|
|
|
|
NO | Is the |
| video input signal available? |
| |
| YES |
Is the | YES |
REF VIDEO input signal |
|
available? |
|
NO |
|
Internal synchronization
Synchronization with the REF VIDEO input signal
Synchronization with the video input signal
66