Setup menus (continued)
USER menu | <EDIT> |
| ||
|
|
|
|
|
No./Item |
|
|
| Description |
|
| |||
|
| |||
324 | This sets the maximum JOG REV speed. | |||
JOG REV MAX |
| 0000 | : | |
|
| 0001 | : | |
|
| 0002 | : | |
|
| 0003 | : | |
| <Notes> |
|
| |
| OThe value for the DV/DVCAM tape is shown in | |||
|
| parenthesis ( ). | ||
| OThe maximum speed is set to | |||
|
| dial on the front panel is operated. | ||
|
| |||
325 | This sets the postroll time. | |||
| Any time from 0 to 5 seconds can be set in 1- | |||
POSTROLL TM | second units. |
| ||
|
| 0000 | 0s |
|
|
| 0001 | 1s |
|
|
| 0002 | 2s |
|
|
| 0003 | 3s |
|
|
| 0004 | 4s |
|
|
| 0005 | 5s |
|
|
|
|
|
|
USER menu | <TAPE PROTECT> |
| ||||
|
|
|
|
|
| |
No./Item |
|
|
| Description |
| |
|
| |||||
|
| |||||
400 | This selects the time to be taken until the | |||||
| unit goes into the tape protection mode when | |||||
STILL TIMER | it is left standing in the stop or search still | |||||
| (JOG/SLOW/SHTL) mode. |
| ||||
| (Unit: s = second, min = minute) |
| ||||
|
| 0000 | 0.5s | <Notes> |
| |
|
| 0001 | 5s | OSTEP FWD and HALF | ||
|
| 0002 | 10s | LOADING are provided in | ||
|
| 0003 | 20s | the tape protection mode. | ||
|
| 0004 | 30s | Either of these can be set | ||
|
| 0005 | 40s | for | STOP and | SEARCH |
|
| 0006 | 50s | STILL. |
| |
|
| 0007 | 1min | OThe | cumulative | standby |
|
| 0008 | 2min | time at the same tape | ||
|
|
|
| position increases when | ||
|
|
|
| transmitting programs or | ||
|
|
|
| otherwise using | identical | |
|
|
|
| materials repeatedly. | ||
|
|
|
| In order to protect the tape, | ||
|
|
|
| it is recommended that the | ||
|
|
|
| shortest possible setting for | ||
|
|
|
| the standby time in the | ||
|
|
|
| same tape location is used. | ||
|
|
|
| OWhen a DV/DVCAM tape is | ||
|
|
|
| used, any setting above 10 | ||
|
|
|
| seconds will be treated as | ||
|
|
|
| 10 seconds. |
| |
|
|
|
|
|
|
|
No./Item |
| Description |
|
| |
|
| |
401 | When the time selected as the setup menu | |
| item No. 400 (STILL TIMER) setting elapses | |
SRC PROTECT | while the unit is in the search STILL | |
| (JOG/SLOW/SHTL) mode, the unit | |
| automatically enters one of the tape | |
| protection modes. This menu item is for | |
| selecting which tape protection mode the | |
| unit is to enter. | |
| 0000 STEP : STEP FWD | |
| 0001 HALF : HALF LOADING | |
| <Note> |
|
| When STEP FWD is selected, the unit | |
| automatically goes into the STANDBY OFF | |
| (HALF LOADING) mode when the total time for | |
| which the unit is left standing in the still status | |
| reaches 30 minutes (or 1 minute for a | |
| DV/DVCAM tape). | |
|
| |
402 | This selects the drum operation in the | |
| STANDBY OFF (HALF LOADING) mode. | |
DRUM STDBY |
|
|
| 0000 | OFF : The drum stops rotating. |
| 0001 | ON : The drum continues rotating. |
|
| |
403 | When the time selected as the setup menu | |
| item No. 400 (STILL TIMER) setting elapses | |
STOP | while the unit is in the STOP mode, the unit | |
PROTECT | automatically enters one of the tape | |
| protection modes. This menu item is for | |
| selecting which tape protection mode the | |
| unit is to enter. | |
| 0000 STEP : STEP FWD | |
| 0001 HALF : HALF LOADING | |
| <Note> |
|
| When STEP FWD is selected, the unit is | |
| automatically transferred to the STANDBY OFF | |
| (HALF LOADING) mode when the total time | |
| during which it has been left standing in the | |
| STOP mode reaches 30 minutes (or 1 minute for | |
| a DV/DVCAM tape). | |
|
|
|
The underlined items indicates the initial setting.
48