Panasonic AJ-SD965 Edit RPLCE4, Edit Rplcec, Confi Edit, AUD Edit OUT, Auto Entry, Cf Adj Sel

Setup menus (continued)

USER menu		<EDIT>
No./Item			Description
308	The same type of setting as setup menu No.
	305. This selects the channel concerned
EDIT RPLCE4	when the CH4 edit preset is set in
	compliance with the ON or OFF presetting for
	the analog audio signals designated by the
	controller.
		0000	N-DEF :
		Not set.
		0001	CH1 :
		Compliance with analog CH1 edit preset.
		0002	CH2 :
		Compliance with analog CH2 edit preset.
		0003	CH1+2 :
		Compliance with analog CH1 or CH2 edit
		preset.
309	The same type of setting as setup menu No.
	305. This selects the channel concerned
EDIT RPLCEC	when the CUE edit preset is set in
	compliance with the ON or OFF presetting for
	the analog audio signals designated by the
	controller.
		0000	N-DEF :
		Not set.
		0001	CH1 :
		Compliance with analog CH1 edit preset.
		0002	CH2 :
		Compliance with analog CH2 edit preset.
		0003	CH1+2 :
		Compliance with either analog CH1 or CH2
		edit preset.
310	This selects whether to conduct
	simultaneous playback while editing is in
CONFI EDIT	progress.
		0000	OFF : No simultaneous playback
		0001	ON : Simultaneous playback
	<Note>
	Simultaneous playback is valid when the MODE
	switch is set to TAPE.
311	This selects the connection method for the
	digital audio edit IN point.
AUD EDIT IN
		0000	CUT : Cut processing
		0001	FADE : V Fade processing
312	This selects the connection method for the
	digital audio edit OUT point.
AUD EDIT OUT
		0000	CUT : Cut processing
		0001	FADE : V Fade processing
313	This selects whether the IN point is to be
	entered using the PREROLL button when it
AUTO ENTRY	has not been entered.
		0000	DIS : IN point is not entered.
		0001	ENA : IN point is entered.

No./Item				Description
314	This selects the CF adjustment deck with
	deck-to-deck editing.
CF ADJ SEL
	0000	PLAYER :
	The player’s edit IN/OUT points are adjusted.
	(reference as the RECORDER side)
	0001 RECORD :
	The recorder’s edit IN/OUT points are
	adjusted. (reference as the PLAYER side)
315	This selects the mode after cue-up operation
	is complete.
AFTER
CUE-UP	0000	STOP : STOP mode
	0001	STILL : SHTL STILL mode
	0002	STILL2 : SLOW STILL mode
320	This sets the maximum SLOW FWD speed.
VAR FWD MAX	0000	+4.1	: +4.1 (+3.1)a speed
	0001	+1.85	: +1.85a speed
	0002	+1	: +1a speed
	<Notes>
	OThe value for the DV/DVCAM tape is shown in
	parenthesis (			).
	OAt any speed setting other than +4.1, the
	phase cannot be synchronized from the
	editing controller.
321	This sets the maximum SLOW REV speed.
VAR REV MAX	0000	–4.1	: –4.1 (–3.1)aspeed
	0001	–1.85	: –1.85aspeed
	0002	–1	: –1aspeed
	0003	–0.43	: –0.43aspeed
	<Note>
	The value for the DV/DVCAM tape is shown in
	parenthesis (		).
323	This sets the maximum JOG FWD speed.
JOG FWD MAX	0000	+4.1	: +4.1 (+3.1)a speed
	0001	+1.85	: +1.85a speed
	0002	+1	: +1a speed
	<Notes>
	OThe value for the DV/DVCAM tape is shown in
	parenthesis (			).
	OThe maximum speed is set to +1a when the
	dial on the front panel is operated.
	OAt any speed setting other than +4.1, the
	phase cannot be synchronized from an editing
	controller which synchronizes the phase using
	the JOG command.

The underlined items indicates the initial setting.

47