Setup menus (continued)
USER menu | <VIDEO> | ||
|
|
|
|
No./Item |
|
| Description |
|
| ||
|
| ||
600 | This selects the internal reference signal. | ||
INT SG |
| 0001 | BB : |
|
| The black burst is generated. | |
|
| 0002 | CB100 : |
|
| 100% color bars are generated. | |
|
| 0003 | CB75 : |
|
| 75% color bars are generated. | |
|
| ||
601 | This selects whether to float the vertical sync | ||
| position of the video output in order to align | ||
OUT VSYNC | the video output phase with the input in the | ||
| EE/record/edit modes. | ||
|
| 0000 | |
|
| 0001 | VF : Signals are floated. |
|
| ||
602 | This selects whether to mute the video | ||
| output signals when a blank on the tape has | ||
| been detected during playback. | ||
|
| 0000 | |
|
| 0001 | LOW RF : Muting. (Set to gray.) |
|
| ||
603 | This selects ON or OFF for the closed | ||
| caption signal of the first field. | ||
CC (F1) BLANK |
|
|
|
|
| 0000 | BLANK : Signal is forcibly blanked. |
|
| 0001 | THRU : Signal is not blanked. |
| <Note> | ||
| This setup menu is not displayed in the 625i | ||
| system. | ||
|
| ||
604 | This selects ON or OFF for the closed | ||
| caption signal of the second field. | ||
CC (F2) BLANK |
|
|
|
|
| 0000 | BLANK : Signal is forcibly blanked. |
|
| 0001 | THRU : Signal is not blanked. |
| <Note> | ||
| This setup menu is not displayed in the 625i | ||
| system. | ||
|
| ||
605 | This selects the freeze mode for still | ||
| pictures. | ||
FREEZE SEL |
|
|
|
|
| 0000 | FIELD : Field freeze. |
|
| 0001 | FRAME : Frame freeze. |
| <Note> | ||
| When frame freeze has been selected, the frame | ||
| slow status is established with the slow setting. | ||
|
| ||
606 | This selects chroma color killer processing | ||
| for the video output signals. | ||
OUT C KILL |
|
|
|
|
| 0000 | B/W : No color signals are output. |
|
| 0001 | COLOR : Color signals are output. |
|
|
|
|
No./Item |
| Description |
|
| |
|
| |
609 | This selects whether to superimpose EDH | |
| onto the SDI output signals. | |
EDH |
|
|
| 0000 | OFF : EDH is not superimposed. |
| 0001 | ON : EDH is superimposed. |
| <Note> |
|
| Even when ON is selected for this setting, EDH | |
| is not superimposed onto the signals output from | |
| the SDI OUT 3 connector if the SUPER switch | |
| on the front panel of the unit is set to ON. | |
|
| |
610 | This selects the analog component input | |
| level. |
|
PB/PR IN LV |
|
|
| 0000 | M II : M II level |
| 0001 | |
| <Notes> | |
| OThis setup menu is not displayed in the 625i | |
| system. | |
| OWhen no optional board | |
| been installed, setup menu No. 610 is not | |
| displayed. | |
|
| |
611 | This selects Y/C separation processing for | |
| the composite input signals. | |
YC SEP MODE |
|
|
| 0000 | B/W : |
| The signals are processed as B/W signals. | |
| 0001 | AUTO : |
| The signals are automatically detected. | |
| <Note> |
|
| When no optional board | |
| installed, setup menu No. 611 is not displayed. | |
|
| |
614 | This selects the analog component output | |
| level. |
|
PB/PR OUT LV |
|
|
| 0000 | M II : M II level |
| 0001 | |
| <Note> |
|
| This setup menu is not displayed in the 625i | |
| system. |
|
|
| |
618 | This selects the interpolation operation. | |
| Vertical interpolation is conducted automatically | |
INTERPOLATE | during | |
| vertical movement of the playback pictures. | |
| However, this menu item enables the | |
| interpolation operation to be forcibly turned off. | |
| 0000 | OFF : |
| Interpolation is forcibly turned off. | |
| 0001 | AUTO : |
| Interpolation is automatically turned on during | |
| ||
|
|
|
The underlined items indicates the initial setting.
51