Panasonic AJ-SD965 manual SYS H Offset, Sys Sc/H, Local, Bright, Contrast, Menu Lock

Page 39

Setup menus (continued)

SYSTEM menu

No./Item		Description


18	System phase adjustment.
SYS H OFFSET	0000	–3 :–13.4 µsec
	0001	–2 :–8.96 µsec
	0002	–1 :–4.52 µsec
	0003	0 : 0 sec
	0004	1 : +4.52 µsec
	0005	2 : +8.96 µsec
	0006	3 : +13.4 µsec
	<Note>
	Factory settings will remain unchanged even if
	an attempt is

19	This sets whether the system phase is to be
	adjusted by the unit or from the external
SYS SC/H	encoder remote controller.
	0000	REMOTE :
	The system phase is adjusted from the
	external encoder remote controller.
	0001	LOCAL :
	The system phase is adjusted by the unit.
	<Note>
	The setting of this menu item has no effect when
	the ENC CONTROL switch is at the LOCAL
	setting.

The underlined items indicates the initial setting.

No./Item		Description


30	This adjusts the brightness of the LCD
	monitor on the front panel.
BRIGHT
	0000	–7
	:	:
	0007	0
	:	:
	0014	7
	<Note>
	If setting operation is performed, the setting
	value does not return to factory (default) setting.

31	This adjusts the contrast of the LCD monitor
	on the front panel.
CONTRAST
	0000	–7
	:	:
	0007	0
	:	:
	0014	7
	<Note>
	If setting operation is performed, the setting
	value does not return to factory (default) setting.

40	This selects whether the system file lock
	mode is to be engaged or released.
MENU LOCK
	0000	OFF : The lock is released (file data
		can be changed).
	0001	ON : The lock is engaged (file data
		cannot be changed).
	<Note>
	Setup menu No. 00 (WFM SEL) can be changed
	at any time regardless of the setting selected for
	this menu item.

Video output signal adjustments

The video output signals are adjusted using combinations of the ENC CONTROL switch position and SYSTEM menu item No.19 (SYS SC/H) setting.

These adjustments can be used for analog component, analog composite and SDI signal output. A control matrix of the adjustments is shown below.

	Setting			Item adjusted

ENC CONTROL		SYSTEM menu item	SYSTEM menu item		Bottom of front panel
switch position		19: SYS SC/H	11: SYS SC COAR.		VIDEO LEVEL
			12: SYS SC FINE		CHROMA LEVEL
			13: SYS H		SET UP/BLC
					HUE/CHROMA PH

LOCAL		LOCAL	Unit		Unit

		REMOTE
		REMOTE

		LOCAL	Unit
REMOTE					External encoder remote controller
REMOTE		REMOTE	External encoder	remote	External encoder remote controller
		REMOTE	controller
			controller

39

Image 39

Contents Model No. AJ Operating Instructions$ this Equipment Must be Grounded Operating precautionIt also Contains Lead Some Components Introduction ContentsFeatures Features Front panel Parts and their functionsParts and their functions Search button Player and Recorder buttonsPlayer RecorderReview PreviewAudio VideoAudio MIX switch When the Audio MIX switch is set to 1&2When the Audio MIX switch is set to 3&4 REC UnityVAR Regen PresetRemote LocalTC Preset Shift buttonMenu Display panel REC INH Edit RECRear panel IN/OUTOUT = Signal GND terminal Parallel Remote connectorAnalog Audio OUT connectors Cmonitor OUT connectorsOFF ConnectionsSource machine RecorderConnections Connections with editing controllerIN/OUT XL cassettes TapesConsumer-use DV and Dvcam cassettes CassettesJog/Shuttle Jog modeInsert Manual editingPreroll AssembleAutomatic editing deck-to-deck Switch settings and adjustmentsWhen using the AJ-SD965 as the recorder When using the AJ-SD965 as the playerMatch frame processing function Selecting the editing modeAutomatic editing deck-to-deck AssemChecking and previewing edit points How to calculate the durationRe-registering an edit point Modifying edit pointsAuto tag function recorder side Executing and reviewing automatic editingPost-rolling Retry functionAudio split editing Between the audio in and OUT points Audio split editing$ Duration display Between the video in and OUT pointsVariable memory editing Variable memory editing operation procedure$ Selecting the variable memory mode $ Releasing variable memory modeRegistering setup items in the PF buttons Operations using the PF buttonsPF Programmable Function functions Setup initial settings Changing the settingsSystem Setup menusSetting and releasing the lock mode Changing the fileLoading user files Setup menusLock mode can be set Lock mode can be set Counter displayMenu screen Saving user filesSystem menu Bright SYS H OffsetSYS SC/H LocalBasic User menuSYS Format Chara H-POSChara V-POS Chara TypeOperation Memory stop function REC INH Lamp Eject SW INHEject Lamp Interface Edit AUD Edit Edit RPLCE4Edit Rplcec Confi EditTape Protect Time Code Edit Vitc OUTSBC TC OUT ADVMute SEL YC SEP ModeINT SG OUT VsyncCmpst ESR ModeCCR Mode SetupWide Select CC RECUmid POS Umid RECUmid GEN INTCH4 in LV CH1 in LVCH2 in LV CH3 in LVPB Fade Moni CH SELPCM CUE REC CUECUE OUT Moni CH MON Auto SEL User menu AudioDV PB ATT REC PT MuteREC LINE2 BlankADD Line REC LINE1REC LINE3 REC LINE4Teletext SEL Number of lines which can be set for Teletext LCD User bit Setting the internal time codeTime code/user bit Time codeVitc Setting the external time codeTime code/user bit LTCDisplay position Operation modeSuperimpose screen Characters displayedInternal synchronization External synchronization of video output signalsServo reference signal Video output signals and servo reference signalAudio signal a Audio V fade functionFade is performed instantaneously to eliminate the noise F1 board Audio Printed circuit boardAudio recording channel Monitor output channelStandard rack Fasten it to the rack with set screws Rack mountingRack-mounting adaptors Inner memberAttaching the dust cover Video head cleaningMaintenance Condensation$ Warning information display Error messagesDiag menu $ Displaying the Diag menuError messages $ Displaying the Hours Meter information$ Umid information display Servo not Locked High Error RateFAN Stop No RFError messages Torque ERR VTR Stop Torque VTR Stop ErrorReel Rota VTR Stop TOO Fast ReelRS-232C interface Hardware specificationsExternal interface specifications Connector specificationsSend format controller PC 5 VTR Software specifications ProtocolRS-232C interface Communication parametersError code table $ When the communication has terminated normallyReturn format VTR 5 controller PC $ Commands relating to operation control Command tableStatus $ Commands relating to inquiriesCTL/TC Data STX QCD ETX RequestConnector signals Remote IN/OUTRemote OUT Connector signals RS-232CSUB 25-pin crossover cable supported $Digital IN/Analog component OUT Specifications$Video input connector $Digital videoOther Input/Output Connectors SpecificationsMemo Technical Support Panasonic Broadcast & Television Systems CompanyEastern Zone Western Zone