Setup menus
BASIC
| Item |
| Setting |
|
|
|
|
|
|
| Description of settings |
No. | Superimposed | No. | Superimposed |
| |
|
| ||||
display | display |
|
| ||
|
|
|
| ||
|
|
|
|
| |
|
|
|
|
| |
001 | LOCAL ENA |
|
| For setting the buttons on the front panel which can be operated when the | |
|
|
|
| LOCAL/MENU/REMOTE switch is at the REMOTE position. | |
|
| 0000 | DIS | 0: None of the buttons can be operated. | |
|
| 0001 | ST&EJ | 1: Only the STOP and EJECT buttons can be operated. | |
|
| 0002 | ENA | 2: All of the buttons with the exception of COUNTER and RESET can be operated. | |
|
|
|
|
| |
002 | TAPE TIMER |
|
| For setting how the time is to be displayed on the CTL counter display. | |
|
| 0000 | ±12h | 0: | |
|
| 0001 | 24h | 1: | |
|
|
|
|
| |
003 | REMAIN SEL |
|
| For setting the superimposing of the remaining tape time and/or total tape duration | |
|
|
|
| displays onto the VIDEO OUT2 connector. | |
|
| 0000 | OFF | 0: No displays are superimposed. | |
|
| 0001 | 2L | 1: The remaining tape time is displayed on the second line. | |
|
| 0002 | 1L | 2: The remaining tape time is displayed on the first line. | |
|
| 0003 | R/TTL | 3: The remaining tape time is displayed on the first line and the total tape duration | |
|
|
|
|
| on the second line. |
|
|
|
| <Notes> | |
|
|
|
| O The information will not be displayed when 2L is set and TIME is selected as the | |
|
|
|
|
| menu item No.006 [DISPLAY SEL] setting. |
|
|
|
| O The remaining tape time will not be displayed when R/TTL is set and TIME is | |
|
|
|
|
| selected as the menu item No.006 [DISPLAY SEL] setting. |
|
|
|
|
| |
005 | SUPER |
|
| For setting the superimposing of the displays onto various connectors. | |
|
| 0000 | OFF | 0: The displays are superimposed onto none of the output connectors. | |
|
| 0001 | CMPST | 1: The displays are superimposed onto VIDEO OUT2. | |
|
| 0002 | CMPNT | 2: The displays are superimposed onto the HD component output (Y). | |
|
| 20003 | 2SDSDI | 3: The displays are superimposed onto SD SDI OUT. | |
|
| 20004 | 2HDSDI | 4: The displays are superimposed onto HD SDI OUT. | |
|
| 20005 | 2CPS&SD | 5: The displays are superimposed onto VIDEO OUT2 and SD SDI OUT. | |
|
| 20006 | 2CPN&HD | 6: The displays are superimposed onto the HD component output (Y) and HD SDI | |
|
|
|
|
| OUT. |
|
|
|
|
|
|
<Note>
Even when OFF is selected as the menu item No.005 [SUPER] setting, the superimposing will be displayed in accordance with what is set using menu item No.006 [DISPLAY SEL] during the menu settings. Once the menu settings are exited, the display follows the setting selected for menu item No.005 [SUPER].
2 This appears when the
“” indicates the factory setting.
33