Panasonic AJ-YA120AG manual Other Connectors, Options

Specifications

$ Video output adjustment ranges

HD serial digital output system phase21:

1080i: ±0.5H (in 13.5ns increments)

59/60 Hz:	±1100 samples
50 Hz:	±1320 samples
23/24 Hz:	±1375 samples

720p: ±0.5H (in 13.5ns increments) 59/60 Hz: ±825 samples

SD serial digital/composite video output system phase21:

±0.5H (in 37ns increments) 59 Hz: ±858 samples

50 Hz: ±864 samples

Composite video output SC phase; ±180 deg. or more

[AUDIO]

$ Digital audio

Sampling frequency:

48 kHz (synchronized with video)

Quantizing:

16 bits

Frequency response:

20 Hz to 20 kHz ±1 dB (at reference level)

Dynamic range:

More than 85 dB (1 kHz, emphasis OFF)

Distortion:

Less than 0.1% (1 kHz, emphasis OFF, reference level)

Crosstalk:

Less than –80 dB (1 kHz, between 2 channels)

Wow & flutter:

Below measurable limits

Headroom:

18 dB

$ Audio input connectors21

Analog input (CH1, CH2, CH3, CH4):

XLR k4, 600 Ω/high impedance switchable (default: 600 Ω)

+4/0/–20 dBm/–60 dBu switchable

(The impedance is set to 3 kΩ when –60 dB is selected)

HD serial digital input:

BNC k1, 75 Ω,

Compliant with SMPTE 292M/296M/299M standard

$ Audio output connectors

Analog output (CH1, CH2, CH3, CH4):

XLR k4, low impedance

+4/0/–20 dBm (with 600 Ω load) switchable Monitor output L or R switchable for CH3/CH4 output

HD serial digital output21:

BNC k2, 75 Ω

(compliant with SMPTE 292M/296M/299M standard)

SD serial digital output21:

BNC k1, 75 Ω

(compliant with SMPTE 259M-C/272M-A, ITU-R BT.656-4 standards)

Monitor output (L, R):

PHONO k2, 600 Ω, –8 dBv

Headphone output:

Stereo (6 mm diameter), 8 Ω, level variable

[OTHER CONNECTORS]

Time code input21:

BNC k1, 0.5 to 8V [p-p], 10 kΩ

Time code output:

BNC k1, low impedance, 2.0 ±0.5 V [p-p] (with 600 Ω load)

RS-422A input:

D-sub 9-pin, for AJ-A95

RS-422A interface

DC power output:

4 pins k1, DC 12 V, 250 mA, for AJ-A95

DV input/output connector:

Connector:

6-pin type Transmission rate:

400 Mbps, 200 Mbps, 100 Mbps;selectable Transmission data:

Compliant with IEEE 1394-1995 Compliant with IEC 61883-Part1, Part2

Control command:

Compliant with AV/C command set (General Ver 3.0, VCR Subunit Ver 2.01)

[OPTIONS]

HD SDI input/output SD SDI output board: AJ-YA120AG

Digital video input/output board: AJ-YAD120AG

21: This functions only when the AJ-YA120AG (optional accessory) is installed.

22: This functions only when the AJ-YAD120AG (optional accessory) is installed.

Weight and dimensions shown are approximate. Specifications are subject to change without notice.

54