Panasonic AJ-YA120AG Binary GP, Tcg, Phase Corr, TCG CF Flag, DF Mode, Ndf, Tc Out Ref, Vout, Sbc

Setup menus

TIME CODE

	Item		Setting
					Description of settings
No.	Superimposed	No.	Superimposed
	display		display
508	BINARY GP			For setting the usage status for the user’s bit of the time code generated by the
				TCG.
		0000	000	0: No character set specified
		0001	001	1:	8-bit character set complying with the ISO646 and ISO2022 standards
		0002	010	2: Undefined
		0003	011	3: Undefined
		0004	100	4: Undefined
		0005	101	5: Page/line
		0006	110	6: Undefined
		0007	111	7: Undefined
509	PHASE CORR			For setting whether to control the phase correction of the LTC output during
				playback.
		0000	OFF	0: The phase correction is not controlled.
		0001	ON	1: The phase correction is controlled.
510	TCG CF FLAG			For selecting whether to set the CF flag of the TCG to ON.
		0000	OFF	0: The CF flag is set to OFF.
		0001	ON	1: The CF flag is set to ON.
511	DF MODE			For selecting whether to use the DF or NDF mode for CTL and TCG.
		0000	DF	0: The drop frame (DF) mode is used.
		0001	NDF	1: The non-drop frame (NDF) mode is used.
512	TC OUT REF			For setting the signal to be used as the reference for aligning the phase of the time
				code which is output from the TC OUT connector with the phase of the external TC
				input signal when a setting other than INT is selected as the menu item No.507 [TC
				SOURCE] setting. (In EE mode only)
		0000	VOUT	0: The output video signal is used as the reference.
		0001	TC_IN	1: The external time code input signal is used as the reference.
513	VITC OUT			For selecting how to output the VITC signal which is superimposed onto the output
				video signal.
		0000	SBC	0: In the playback mode, the time code recorded in the SBC area is output.
		0001	VAUX	1: In the playback mode, the time code recorded in the VAUX area is output.
				<Note>
				O The VITC information which is detected by the HD serial input is automatically
					recorded in the VAUX area when the images are recorded.
				O When “23/24,” “25(HD)” or “25(SD)” is selected as the menu item No.25
					[SYSTEM FREQ] setting and VAUX is selected as the VITC OUT setting, the
					time code which is output may not be continuous.
514	HD EMBD VITC			For selecting whether to superimpose the VITC information onto the HD serial
				output.
		0000	OFF	0: The VITC information is not superimposed.
		0001	ON	1: The VITC information is superimposed.
515	HD EMBD LTC			For selecting whether to superimpose the LTC information onto the HD serial
				output.
		0000	OFF	0: The LTC information is not superimposed.
		0001	ON	1: The LTC information is superimposed.
530	TC PRESET			For setting the time code of the internal TCG.
				00000000 to 23595924
				Selection range of 00000000 to 23595929 when 59/60 is selected as the menu
				item No.35 [SYSTEM FREQ] setting
531	UB PRESET			For setting the user’s bit of the internal TCG.
				00000000 to FFFFFFFF

“” indicates the factory setting.

42