Panasonic AJ-YA120AG manual Specifications, General, $ Digital video, $ Video input connectors21

Page 53

Specifications

[GENERAL]

Power supply:

AC (100-240) V, 50/60 Hz

DC 12V, 6.6 A

Power consumption: 69 W (main unit only)

97 W (when AJ-YA120AG, AJ-YAD120AG are installed)

indicates safety information.

Ambient operating temperature:

41°F to 104°F (5°C to 40°C)

Ambient operating humidity: 10% to 80% (no condensation)

Weight:

17.38lb (7.9 kg)

Dimensions (WkHkD):

8 7/16k5 1/4k16 7/8 inches (214k132k428 mm) Recording format21, 22:

DVCPRO HD-LP Recording video signals21, 22:

1080i/59.94 Hz, 720p/59.94 Hz, 1080i/50 Hz switchable

Recording audio signals21: 48 kHz, 16 bits, 8 channels

Recording tracks21:

O Digital video/audio: Helical track

O Time code: Helical track (sub code area)

O Cue signal: 1 track

O Control (CTL) signal: 1 track

Playback formats:

DVCPRO HD-LP, DVCPRO HD, DVCPRO50,

DVCPRO P, DVCPRO, DV-SP, DVCAM

Tape speed:

67.64mm/sec. (in 59.94 Hz mode)

67.70mm/sec. (in 60/50 Hz mode)

Recording time:

92 min. (when using AJ-HP92ELG)

Tapes used: Metal tapes

FF/REW time:

Approx. 2 min. (when using AJ-HP92ELG)

[VIDEO]

$ Digital video

Sampling frequency

Y: 74.25 MHz

PB/PR: 37.125 MHz

Quantizing:

8 bits

Video compression system:

DCT + variable length code

Video compression ratio:

1:6.7

Error correction:

Reed-Solomon product code

Video recording bit rate:

100 Mbps

$ Video input connectors21

HD serial digital input:

BNC k1

(compliant with SMPTE 292M/296M/299M standards)

Reference input:

Black burst/HD tri-level sync automatic switching BNC k2 (loop-through k1)

75Ω termination ON/OFF switchable

$ Video output connectors

HD serial digital output21:

BNC k2

(compliant with SMPTE 292M/296M/299M standards)

(information superimposing ON/OFF)

SD serial digital output21:

BNC k1 (compliant with SMPTE 259M-C/272M- A, ITU-R BT.656-4 standards)

(information superimposing ON/OFF)

Analog composite output:

BNC k2

VIDEO123, VIDEO2

(information superimposing ON/OFF)

HD analog component output:

BNC k323 (Y/PB/PR, R/G/B switchable) (information superimposing ON/OFF)

21: This functions only when the AJ-YA120AG (optional accessory) is installed.

22: This functions only when the AJ-YAD120AG (optional accessory) is installed.

23: The VIDEO1 and HD analog component Y outputs are switched.

53

Image 53

Contents Model No. AJ- E Operating InstructionsOperating precaution For your safetyFor U.K. only Contents Introduction FeaturesMulti-functional interfaces Front panel Parts and their functionsRepeat lamp LOCAL/MENU/REMOTE switchSystem format lamp SCH lamp2? Analog lamp2 Audio monitor selector switch@ Meter button and lamp CH34 Audio output lamps CH12, CH34Volume control Analog audio signal recording level controls2720p lamp Headphone jackWhen the AJ-YA120AG or AJ-YAD120AG is installed REC button2 No optional board installedTAPE/EE switch Reset buttonAC in inlet Rear panelDC in socket DC OUT socketTC OUT connector TC in connector2HD/SD REF Video in connectors and 75Ω termination switch2 Audio in connectors CH1, CH2, CH3, CH42Tapes Precautions for using consumer DV and Dvcam cassettesInserting the tape Usable tapesOperation Turning on the unit’s powerStop mode Pause/recording follow-on recording RecordingCue/review PlaybackStill image playback Insert a cassette tape into the unit Press the Play buttonVariable speed playback When AJ-A95 is connectedLinear 0.3k playback Setting the repeat playback mode Setting the Begin and END pointsSet the VTR to the menu mode Repeat playbackTime code & user’s bit Setting the time codeTime code User’s bitSelect menu item No.531 UB Preset Setting the user’s bitPlaying back the time code and user’s bit T2R00 07 04Characters displayed Superimposed screen displaysRemaining tape display Display positionTime mode Operation modeSTA mode M modeSetting method using the on- screen menus Setup initial settingsReturning to the factory settings Set the LOCAL/MENU/REMOTE switch to the Menu positionSetting the user defaults Menu protection Loading the user defaultsWith the hour meter displayed, press the Search button Releasing the menu protection modeDisplaying the Diag menu Menus which are displayed Setup menusTYPE-B Near Audio in SEL System Indicates the factory settingSetting Description of settings Superimposed Display HD SYS H ADV Setting Description of settingsSystem Freq Basic Format Display PB Format SYS FormatManual AutoManual Dvcam HD-LP Formats for playback022 020 023 Playback format Operation SP Mode INH FRZ Mode SELMemory Mode Auto REWBattery SEL Rept ModeCTL BGN TC BGNTape Protect InterfaceTime Code DF Mode Phase CorrTC Preset UB PresetVideo CCR Mode SD ESR Mode SDBLK Clip CC F1 BlankAudio CH1 REC CUECH2 CH3Menu DIF Speed DIF ConfigDIF in CH DIF OUT CH23/24 Hz mode and 25 Hz mode Error messagesError No Error message and description Unload Error Operation performed by AJ-HD1200A CondensationMaintenance Video head cleaningProcedure to ejecting the tape manually in an emergency Emergency eject$ Video input connectors21 Specifications$ Video output connectors GeneralOptions Other ConnectorsMemo Panasonic Broadcast Europe Panasonic Marketing Europe GmbH