Panasonic AJ-YA120AG Ctl Bgn, Tc Bgn, End, Rept Mode, Freeze, Battery SEL, Lion, Type-A, Type-B

Setup menus

OPERATION

	Item		Setting
				Description of settings
No.	Superimposed	No.	Superimposed
	display		display
161	CTL BGN			For setting the BEGIN point in the repeat playback mode.
	or			Either TC or CTL is set as the counter display mode using the COUNTER button.
	TC BGN			If no mode is set, – – : – – : – – : – – appears, and the tape start serves as the
				BEGIN point.
162	END			For setting the END point in the repeat playback mode.
				Either TC or CTL is set as the counter display mode using the COUNTER button.
				If no mode is set, – – : – – : – – : – – appears, and the tape end serves as the END
				point.
163	REPT MODE			For setting what images are to be output while the tape returns to the BEGIN point
				in the repeat playback mode.
		0000	FREEZE	0: The tape returns to the BEGIN point with the image played back at the END
				point still frozen.
		0001	BLACK	1: The tape returns to the BEGIN point while the screen remains black.
		0002	SW	2: The tape returns to the BEGIN point following the setting selected by the
				TAPE/EE switch.
				<Note>
				If the tape end is set as the END point when “0:FREEZE” is selected, the playback
				image will not be frozen properly.
				Set the END point to a place within the range where images are recorded.
180	BATTERY SEL			For setting the type of battery.
		0000	NiCd12	0: 12 V-type battery
		0001	NiCd13	1: 13 V-type battery
		0002	NiCd14	2: 14 V-type battery
		0003	S-LION	3: Setting for using the BP-L90A lithium-ion battery.
		0004	I-LION	4: Setting for using the ENDURA80 lithium-ion battery.
		0005	TYPE-A	5: Setting for using the battery selected by the menu item No.181 [TYPE-A NEAR]
				item and No.182 [TYPE-A END] item
		0006	TYPE-B	6: Setting for using the battery selected by the menu item No.183 [TYPE-B NEAR]
				item and No.184 [TYPE-B END] item
181	TYPE-A NEAR	0000	10.6	For setting (in increments of 0.1 V) the voltage level at which the counter flashes as
		:	:	warning for TYPE-A battery (selected as the menu item No.180 [BATTERY SEL]
		0044	15.0	item).
				<Note>
				When this item has been set to a voltage level close to 15.0 V, the counter display
				may flash even when an AC power source is being used.
182	TYPE-A END	0000	10.6	For setting (in increments of 0.1 V) the voltage level at which the TYPE-A battery
		:	:	(selected as the menu item No.180 [BATTERY SEL] item) is to be automatically
		0034	14.0	turned off.
183	TYPE-B NEAR	0000	10.6	For setting (in increments of 0.1 V) the voltage level at which the counter flashes as
		:	:	warning for TYPE-B battery (selected as the menu item No.180 [BATTERY SEL]
		0044	15.0	item).
				<Note>
				When this item has been set to a voltage level close to 15.0 V, the counter display
				may flash even when an AC power source is being used.
184	TYPE-B END	0000	10.6	For setting (in increments of 0.1 V) the voltage level at which the TYPE-B battery
		:	:	(selected as the menu item No.180 [BATTERY SEL] item) is to be automatically
		0034	14.0	turned off.

“” indicates the factory setting.

39