Panasonic AJ-YA120AG Auto REW, FRZ Mode SEL, Stboff, REC INH Lamp, Light, Flash, Eject SW INH

Setup menus

OPERATION

	Item		Setting
				Description of settings
No.	Superimposed	No.	Superimposed
	display		display
110	AUTO REW			For setting whether the tape is to be automatically rewound to its beginning when
				the tape end is detected.
		0000	OFF	0: The tape is not rewound.
		0001	ON	1: The tape is rewound to its beginning.
112	FRZ MODE SEL			For setting the video output when the mode is transferred from playback images to
				standby OFF (half loading).
		0000	DIS	0: The video output is muted.
		0001	STBOFF	1: When the standby OFF (half loading) mode is established, the image played
				back at that moment is frozen and output.
114	REC INH LAMP			For setting the operation of the REC INHIBIT lamp when the cassette is set to the
				erasure prevention status.
		0000	LIGHT	0: The lamp lights.
		0001	FLASH	1: The lamp flashes.
				<Note>
				When the REC INHIBIT switch on the front panel is set to ON, the REC INHIBIT
				lamp lights at all times regardless of what setting is selected for this menu item.
115	EJECT SW INH			For setting whether to restrict the operation of the EJECT button on the front panel.
		0000	REC	0: Operation is inhibited while the unit is in the recording mode.
		0001	OFF	1: The EJECT button can be operated in all operation modes.
118	SP MODE INH			For selecting whether to enable or disable recording on a tape which has been
				recorded using a format other than DVCPRO HD-LP.
		0000	OFF	0: Recording onto the cassette tape is enabled.
		0001	ON	1: Recording onto the cassette tape is disabled.
150	SEARCH SPEED			For setting the search still, cue and review speed.
		0000	X4.1	0: 4.1k normal tape speed
		0001	X8.4	1: 8.4k normal tape speed
152	HUMID OPE			For setting the unit’s operation when condensation has formed.
		0000	OFF	0: The unit does not operate when condensation has formed.
		0001	ON	1: It operates even when condensation has formed but no guarantees are made
				that the operation will be trouble-free.
				<Note>
				Since operating the unit when condensation has formed may damage the tape or
				give rise to other trouble, the “0” setting (no operation) is recommended under
				normal circumstances.
154	AUTO BACK			For setting how the follow-on recording function is to be used.
				(For setting the AUTO BACK function operation which rewinds the tape for several
				seconds in order to ensure that the video images follow on one from another with
				no disruptions.)
		0000	OFF	0: The tape is not rewound automatically (no AUTO BACK).
		0001	REC-P	1: The tape is rewound (AUTO BACK) during REC PAUSE, and it then stops in the
				recording standby status. (When PAUSE is released, the tape runs up, and
				recording starts.)
		0002	ALL	2: In addition to the function of the 0001 REC-P setting, the tape is rewound
				(AUTO BACK) during REC PLAY, the tape immediately runs up, and recording
				starts.
160	MEMORY MODE			For setting the repeat playback mode.
		0000	OFF	0: No repeat playback (normal operation).
		0001	M-STOP	1: The tape stops near the BEGIN point when it is fast forwarded or rewound.
		0002	REPT1	2: When the tape reaches the END point, it is rewound to the BEGIN point, and
				stops.
		0003	CONT	3: When the tape reaches the END point, it is rewound to the BEGIN point, and
				plays back, and this is done repeatedly.

“” indicates the factory setting.

38