Panasonic AJ-YA120AG Rec Cue, CH1, CH2, CH3, CH4, CH5, CH6, CH7, CH8, PB Fade, Cut, Embedded AUD

Setup menus

AUDIO

	Item		Setting
				Description of settings
No.	Superimposed	No.	Superimposed
	display		display
730	REC CUE			For setting the input signal to be recorded on the CUE track.
		0001	CH1	1: Audio input CH1 signal
		0002	CH2	2: Audio input CH2 signal
		0003	CH3	3: Audio input CH3 signal
		0004	CH4	4: Audio input CH4 signal
		0005	CH5	5: Audio input CH5 signal
		0006	CH6	6: Audio input CH6 signal
		0007	CH7	7: Audio input CH7 signal
		0008	CH8	8: Audio input CH8 signal
		0009	CH1+2	9: Audio input CH1 + CH2 mixed signal
		0010	CH3+4	10: Audio input CH3 + CH4 mixed signal
		0011	CH5+6	11: Audio input CH5 + CH6 mixed signal
		0012	CH7+8	12: Audio input CH7 + CH8 mixed signal
		0013	CH1~8	13: Audio input CH1 through CH8 mixed signal
731	PB FADE			For setting the processing for the audio edit points (IN point, OUT point) and follow-
				on recording point during playback.
		0000	AUTO	0: The processing follows the status established during recording.
		0001	CUT	1: Cut processing is forcibly performed.
		0002	FADE	2: Fade processing is forcibly performed.
732	EMBEDDED AUD			For setting whether to superimpose audio data onto the HD SDI output and SD SDI
				output.
		0000	OFF	0: The audio data is not superimposed.
		0001	ON	1: The audio data is superimposed.
759	DV PB ATT			For selecting the audio output level during DV format playback.
		0000	OFF	0: The audio output level is not attenuated.
		0001	ON	1: The audio output level is attenuated.
760	REC PT MUTE			For selecting whether to mute the sound at the joins in the recording during DV or
				DVCAM format playback.
		0000	OFF	0: The sound is not muted.
		0001	ON	1: The sound is muted.
762	AUD RATE CON			For setting whether the tape is to be played back without passing the signals
				through the rate converter (without activating the digital filter) in the digital audio
				output unit.
		0000	OFF	0: The tape is played back without passing the signals through the rate converter.
		0001	ON	1: The signals are passed through the rate converter, and the tape is played back.
				<Notes>
				O In modes other than the 60 Hz mode, the signals are not passed through the
				rate converter regardless of this menu item’s setting.
				O ON/OFF control is exercised for channels 1 through 8 at the same time.
				Separate settings cannot be performed on a channel by channel basis.
765	CUE OUT SEL			For setting whether to output the analog CUE signal to the audio output (main line).
		0000	OFF	0: The analog CUE signal is not output.
				During playback, PCM sound is output; in all other modes, no sound is output.
		0001	ON	1: The analog CUE signal is output.
				During playback, PCM sound is output; in all other modes, the analog CUE
				signal is output.
769	MONI SEL			For setting the monitor output sound during playback.
		0000	PLY PCM	0: PCM sound is output.
		0001	PLY CUE	1: CUE sound is output.

“” indicates the factory setting.

46