Panasonic AJ-YA120AG manual Multi-functional interfaces

Features

SD down-converter

The unit comes with a built-in SD down-converter as a standard feature to enable the output of SD SDI signals2 and analog composite signals at the same time as HD SDI output signals2 and for monitoring the signals on an SD monitor.

Up-converter function2

When an SD format tape is played back, it is possible to up-convert the signals to the HD format while at the same time outputting the signals in the SD format.

Cross-converter function2

The unit comes with a built-in cross-converter to enable 1080i/59 Hz format signals to be converted into 720p/59 Hz format signals or, conversely, to enable 720p/59 Hz format signals to be converted into 1080i/59 Hz format signals.

HD analog component output

This feature enables HD signals to be monitored with ease.

AC/DC operation

The unit supports AC supply voltages ranging from 100V to 240V and DC12V power supply as well.

Follow-on recording function2

Using the REC button and PAUSE button together activates the auto back function, enabling the next image to follow on from the last image with no disruptions in the continuity.

On-screen menu settings

Highly detailed and individualized function settings can be performed on-screen.

Time code

The unit is equipped with a built-in time code generator/time code reader (TCG/TCR). Since time code signals can also be input from an external device2, regeneration to an external time code is possible.

[Multi-functional interfaces]

Serial digital input/output2

The unit’s HD component serial I/O interface enables interfacing with HD component video signals and 8-channel digital audio signals using a single BNC connector. (SMPTE 292M/296M/299M) The unit is also equipped with an SD down- converter as a standard feature so that SD component serial signals can be output as well. (SMPTE 259M-C, 272M-A, ITU-R BT.656-4)

Analog video output

Since the unit’s analog composite down-converter comes as a standard feature, the signals can be monitored on an SD monitor.

9-pin remote

The unit’s 9-pin remote control connector enables it to be operated with an external remote controller (AJ-A95: optional accessory).

IEEE1394 digital input/output

Use of the digital video interface board (AJ- YAD120AG: optional accessory) enables signals to be input and output using an interface which complies with the IEEE 1394 standard.

<Playback formats and output formats>

Playback format		Output format
DVCPRO HD-LP,		DVCPRO HD,
DVCPRO HD		DVCPRO50, DV
DVCPRO50		DVCPRO50, DV
DVCPRO		DVCPRO, DV
DVCPRO P, DV, DVCAM		DV
When the E-E mode	is	DVCPRO HD,
established:		DVCPRO50, DV
O Install the AJ-YA120AG board
which is available as an optional
accessory.
O Select a setting other	than
“1394” for menu item No.600
[VIDEO IN SEL].

<Notes>

When any of the settings below is established, no signals will be output from the digital video interface.

O When “23/24,” “25(HD)” or “25(SD)” is selected as the menu item No.25 [SYSTEM FREQ] setting

O When “60/24” is selected as the menu item No.030 [HD FREQUENCY] setting

O When “720p” is selected as the menu item No.630 [1080i>HD_OUT] setting

O When “1080i” is selected as the menu item No.632 [720p>HD_OUT] setting

2 The unit’s recording function become operational only when the AJ-YA120AG (optional accessory) or AJ-YAD120AG (optional accessory) has been installed.

6