JVC SR-VS30U 10 EN, ON-SCREEN Display for VHS deck, To recall an indication, Press DISPLAY/OSD

Page 10

Filename [VS30U_1-EN.fm]

 

VS30U_1-EN.fm Page 10 Thursday, January 31, 2002 3:33 PM

Masterpage:Left

10 EN

INDEX (cont.)

ON-SCREEN DISPLAY (for VHS deck)

If you press DISPLAY/OSD on the Remote when “SUPERIMPOSE” is set to “ON” ( pg. 71), various operational indicators appear on the TV screen.

A Operation Mode Indicators

B Tape Speed SP/EP

C Timer Warning Display

A warning appears on the TV screen to tell you that the timer- recording is to start in 5 minutes if you’re not in the Timer mode at that time. The warning blinks for the entire 5 minutes leading up to the start of timer recording. To clear the display, press CANCEL on the Remote.

D Tape Position Indicator

The tape position indicator appears on the TV screen when you press REW (3) or FF (5) from the Stop mode or perform an Index Search ( pg. 30). The position of “q” in relation to “B” (beginning) or “E” (end)

shows you where you are

Beginning

End

on the tape.

 

 

NOTE:

Depending on the type of tape being used, the tape position indicator may not appear correctly.

E Index number  pg. 30

F Tape Remaining Time Indicator G Counter Display  pg. 33

H Audio Mode Display  pg. 31 I VHS Indicator

J SAP Indicator  pg. 34

K Stereo program Indicator  pg. 34 L Day/Clock Display

M Channel Position Number/ Auxiliary Input Indicator (L-1 or F-1) Dubbing Direction Indicators

(DV ] VHS)  pg. 52 N “Cassette Loaded” Mark

To recall an indication

APress DISPLAY/OSD.

●All indications corresponding to the current status are displayed for 5 seconds. After that, the counter information and RECORD/PAUSE if in the Record Pause mode, remain on the screen.

BPress DISPLAY/OSD again to clear the display.

●The RECORD/PAUSE indication remains on the screen.

Page 10

January 31, 2002 3:21 pm

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Video Cassette Recorder For Customer UseDear Customer Moisture CondensationImportant Product Safety Instructions Cleaning AccessoriesDamage Requiring Service Replacement PartsContents Front View IndexRear View Symbolic Mode Indicators Front Display PanelHow To Use RemoteTo recall an indication 10 ENON-SCREEN Display for VHS deck Press DISPLAY/OSDON-SCREEN Display for DV deck 12 EN Check the contentsConnect the VCR to power source Situate the VCRVideo Connection 8To connect to a TV with S-VIDEO/AUDIO input connectorsYou can obtain high-quality S-VHS pictures Plug & Play Set Perform Plug & Play setupWhat to do if Plug & Play setting failed 14 ENLanguage 16 EN Access the Clock Set screenClock Set PreparationsSemiauto Clock Set Manual Clock Set18 EN Access the Tuner Set screenTuner Set Auto Channel SetAdd or skip the desired channels Access the Manual Channel Set screenManual Channel Set To add channelsInstalling Controller 20 ENAccess the Main Menu screen on the VCR Setting cable boxs brand and channelAccess the Cable Box Set screen Select the cable box’s channelEnter the cable box’s brand 22 ENIf the cable box’s channel does not change to How to control the DBS receiver If your DBS receiver has audio/video output connectorsDBS receiver Select the DBS receiver’s channel Setting DBS receivers brand and channelTurn on the DBS receiver If you do not use a DBS receiver, press rt until OFFRecording Controller during timer recordingScheduled start time of timer recording Because it has no remote sensor, you cannot useBasic Playback VHS deckStart recording Choose a programSet the tape speed Pause/Resume recordingPlayback On the VCR 28 ENStill Picture/Frame-By-Frame Slow Motion On the VCRSlow Motion On the Remote Variable Speed Search On the RemoteRepeat Playback 30 ENIndex Search Next Function MemorySoundtrack Selection Adjust the tracking manuallyManual Tracking Override automatic tracking32 EN Instant Timer Recording ITRVHS deck Record One Program While Watching Another Elapsed Recording Time Indication Reset the counterPress C.RESET before starting recording or playback Tape Remaining TimeRetake 34 ENSecond Audio Recording Playback Active Video CalibrationRecording Select the DV deck DV deckPress DV DV recording indicator lights on the VCR 38 EN Picture may appear distorted during variable speed searchVS30U1a-EN.fm Page 39 Thursday, January 31, 2002 335 PM 40 EN DV deck Record One Program While Watching Another Time CodePrograming Access the PlusCode No. screenAccess the VCR Plus+ Program screen Select the deckCable Box or DBS Receiver Users Guide Channel Number SetGuide Channel Number Set Access the Guide Channel Set screen44 EN Enter the Guide Channel numberGuide Channel Number Enter the receiving channel position numberAccess the Program screen Express TimerAccess the PlusCode screen Enter the program start timePerform Cable Box Control Setting on page 20 or DBS You can program the timer while a regular recording isTimer Programing Anytime during steps 5 through 10, press Weekly24HR Quick Programing Enter the program modeEngage the VCR’s timer mode 48 ENVS30U2-EN.fm Page 49 Thursday, January 31, 2002 338 PM To cancel or change a program Check, cancel and change programs50 EN Overlap each other on the VHS deck Select the program to modifySTART+/- , STOP+/- , DATE+/- , CH+/- , and/or SP/EP Dubbing An Entire Cassette Tape Dubbing52 EN From DV to VHSFrom VHS to DV Dubbing An Entire Cassette Press DV, then press SP/LP pPrepare the VHS deck for dubbing 54 ENLocate the start point on the DV deck Pause dubbingLocate the start point on the VHS deck From VHS to DVPrepare the DV deck for dubbing 56 EN Recorder PlayerStart the source player Set the input mode of recording deck58 EN Start the recording deckPC with DV connector Connection to a PC with DV connectorExample When using this VCR as the source player Connection to another VCRVHS Audio Dubbing Audio Dubbing60 EN DV Audio DubbingEnd Audio Dubbing Engage the Audio Dubbing modeMake connections Start dubbing Press A.DUBVHS Insert Editing Insert Editing62 EN Source tape Recording tapeMake connections Start Editing Engage the Insert Editing modeAV Insert Editing VHS deck only Prepare the recording cassetteProgram Editing Memory Editing64 EN Programs x 8 scenesStart Random Assemble Editing Locate the end pointPrepare the source tape End Random Assemble EditingChange the code for VCR Remote A/B Code Switching66 EN To control two VCRs with the same RemoteBefore performing the following steps Set the TV brand codeOperate the TV TV CH +/-,TV VOL+/-, TV Muting, number keysOperate the Cable Box 68 ENTV CH +/-,number keys Set the DBS receiver brand code Press Stop 8, and release POWER. The DBSControl Operate the DBS receiverSelect the mode Mode SetAccess the Mode Set screen Select the mode settingMode SET When this function is set to onVHS Mode SET 72 ENVHS Mode SET 74 EN For ExampleNormally select this. Hi-Fi sound is played back Correction to the luminance signal to enhance detailsSelecting either HI-FI L or HI-FI R Sound on the left Hi-Fi channel is played backDV Mode SET 76 ENPower 78 EN RecordingVHS deck DV deckTimer Recording 80 ENPlayback Timer RecordingRecording 82 EN Express Timer Programming Cable box Cable Box Control SettingChanging VCR Plus+ Setting Timer Warning Display Tuner SetFebruary 23, 2002 606 pm
Related manuals
Manual 21 pages 16.45 Kb

SR-VS30U specifications

The JVC SR-VS30U is a versatile and high-performance digital video recorder designed to cater to both professionals and enthusiasts in the video production industry. This machine stands out due to its ability to blend two recording formats: DV (digital video) and S-VHS, making it a dual-format powerhouse suitable for various applications. One of its main features is the dual-deck capability, allowing users to record and play back S-VHS tapes while simultaneously digitizing video in the DV format. This flexibility makes it an excellent tool for archiving older videotape formats as well.

In terms of image quality, the JVC SR-VS30U boasts impressive specs. It supports S-VHS quality tapes that can deliver exceptional resolution, enhanced color reproduction, and fine detail, especially when paired with high-quality source material. The unit is equipped with advanced digital processing technologies that optimize video playback and recording, ensuring minimal signal degradation.

One of the key technologies integrated into the SR-VS30U is the built-in DV input and output interface. This allows for quick transfers of digital video to and from computer systems, making it convenient for video editing and processing tasks. The unit is also compliant with the IEEE 1394 FireWire standard, which is essential for facilitating seamless integration with modern editing software and digital devices.

The SR-VS30U features an easy-to-navigate user interface, complete with an LCD display that provides clear indications of recording status and tape position. The well-structured controls enhance usability, making it user-friendly for those both familiar and unfamiliar with video production equipment.

In terms of additional features, the unit comes with a range of editing functions, including insert and assemble edits, allowing for precise control over the final output. It also supports a variety of playback features, including various playback speeds and frame-by-frame options, which are instrumental in refining edits or analyzing footage.

The JVC SR-VS30U demonstrates a robust build quality, ensuring longevity for rigorous usage in professional environments. With these features and its dual-format capabilities, the SR-VS30U is an ideal choice for anyone looking to bridge the gap between traditional S-VHS media and modern digital workflows, providing a reliable and efficient solution for video recording and editing needs.
Top Page Image Contents