JVC SR-VS30U manual Semiauto Clock Set, Manual Clock Set

Filename [VS30U_1a-EN.fm]
VS30U_1a-EN.fm Page 17 Thursday, January 31, 2002 3:35 PM	Masterpage:Right-NoTitle0

EN 17

Semiauto Clock Set
		E Complete the Semiauto Clock Set.
You can change the host channel/D.S.T. (Daylight Saving Time)/
		Press MENU to return to normal screen.
time zone setting manually. First follow steps 1 to 4 in
“Preparations” ( pg. 16), then go to the following steps.
		IMPORTANT
NOTE:
		Turn off the VCR after performing Semiauto Clock. “Auto”
The time set previously will be erased when “AUTO CLOCK”,		will appear on the display panel while the clock is being set.
“HOST CH”, “D.S.T.” or “TIME ZONE” setting is changed.		The current clock time will appear automatically when the
A		clock setting is complete.
	Set “Auto Clock” to “ON”.
		AUTO DAYLIGHT SAVING TIME
Press OK or e repeatedly to
		This function enables automatic adjustment of the VCR’s
move the highlight bar to		clock at the start and end of Daylight Saving Time.
“AUTO CLOCK”, then press		With Auto DST activated, . . .
rt so that “ON” is selected.		. . . on the first Sunday of April at 2:00 AM, the clock is
		adjusted to 3:00 AM.
		. . . on the last Sunday of October at 2:00 AM, the clock is
		adjusted to 1:00 AM.

B Select the host channel.

You can either select “AUTO” or enter a PBS channel number.

Press OK or e to move the highlight bar to “HOST CH”, then press rt repeatedly until “AUTO” or the desired PBS channel number is selected.

NOTE:

Some PBS channels do not transmit clock setting data.

C Select the D.S.T. mode.

Press OK or e to move the highlight bar to “D.S.T.”, then press rt repeatedly until the desired setting is selected.

AUTO: Select if you want to adjust your VCR’s clock automatically by the incoming signal from the host channel. Be sure to select the correct time zone manually in step 4.

ON: Adjustment will be made by the built-in clock itself.

OFF: Select when Daylight Saving Time does not apply to you.

D Select the time zone.

Press OK or e to move the highlight bar to “TIME ZONE”, then press rt repeatedly until “AUTO” or the desired time zone is selected. Each time you press the button, the time zone changes as follows:

{AUTO { ATLANTIC { EASTERN { CENTRAL

{MOUNTAIN { PACIFIC { ALASKA { HAWAII

{(back to the beginning)

NOTE:

If an incorrect time is displayed by the Plug & Play function, you may be receiving the clock setting data of a PBS channel from an adjacent time zone or from an incorrect PBS channel from a cable TV system. If you selected “AUTO” for the host channel in step 2, be sure to select the correct time zone manually.

Manual Clock Set

First follow steps 1 to 4 in “Preparations” (
pg. 16), then go to the following steps.

A Set time, date and year.

Press rt until the desired time appears, then press OK or e. Set the date and year in the same way.

● Holding rtchanges the time in 30-minute intervals, or changes the date in 15-day intervals.

B Select D.S.T. mode.

Press OK or e to move the highlight bar to “D.S.T.”, then press rt to select the desired setting.

ON: Adjustment will be made by the built-in clock itself.

OFF: Select when Daylight Saving Time does not apply to you.

C Start clock.

Press MENU and normal screen appears.

To make corrections any time during the process Press OK or e repeatedly until the item you want to change blinks, then press rt.

Page 17

January 31, 2002 3:35 pm