JVC SR-VS30U manual VS30U2-EN.fm Page 49 Thursday, January 31, 2002 338 PM

Page 49

Filename [VS30U_2-EN.fm]

VS30U_2-EN.fm Page 49 Thursday, January 31, 2002 3:38 PM

NOTES:

Masterpage:Right-NoTitle0

EN 49

●You can program each deck to timer-record as many as 6 programs. If you try to program the VCR to record a seventh, “FULL” appears on the front display panel. To record the extra

program, you must first cancel any unnecessary programs ( pg. 50).

●If “Err” appears on the front display panel, repeat the steps on page 48 again.

●When a menu screen is shown, you cannot use 24HR Quick Programing function. Press MENU to return to normal screen, and try again.

●You can use 24HR Quick Programing function also when the VCR is turned off.

●For 24HR Quick Programing function, the program overlap warning display does not appear even if some programs overlap each other. The program with the lower program number will be recorded and the other one will not be recorded correctly.

●It is not possible to timer-record the same program on both the VHS deck and the DV deck simultaneously.

●During timer recording, it is not possible to change the recording deck (VHS or DV).

●If the times that are programed for recording on the DV deck and on the VHS deck overlap, the earlier start time takes precedence. If the start times are the same, the VHS deck takes precedence.

●If you perform 24HR Quick Programing during recording or Instant Timer Recording (ITR), press TIMER to engage the timer mode after the recording (or ITR) is finished.

Page 49

January 31, 2002 3:37 pm

Page 48 Page 50
Image 49
Page 48 Page 50
Contents For Customer Use Video Cassette RecorderMoisture Condensation Dear CustomerImportant Product Safety Instructions Damage Requiring Service AccessoriesCleaning Replacement PartsContents Index Front ViewRear View Front Display Panel Symbolic Mode IndicatorsRemote How To UseON-SCREEN Display for VHS deck 10 ENTo recall an indication Press DISPLAY/OSDON-SCREEN Display for DV deck Connect the VCR to power source Check the contents12 EN Situate the VCRVideo Connection 8To connect to a TV with S-VIDEO/AUDIO input connectorsYou can obtain high-quality S-VHS pictures What to do if Plug & Play setting failed Perform Plug & Play setupPlug & Play Set 14 ENLanguage Clock Set Access the Clock Set screen16 EN PreparationsManual Clock Set Semiauto Clock SetTuner Set Access the Tuner Set screen18 EN Auto Channel SetManual Channel Set Access the Manual Channel Set screenAdd or skip the desired channels To add channels20 EN Installing ControllerAccess the Cable Box Set screen Setting cable boxs brand and channelAccess the Main Menu screen on the VCR Select the cable box’s channelEnter the cable box’s brand 22 ENIf the cable box’s channel does not change to How to control the DBS receiver If your DBS receiver has audio/video output connectorsDBS receiver Turn on the DBS receiver Setting DBS receivers brand and channelSelect the DBS receiver’s channel If you do not use a DBS receiver, press rt until OFFScheduled start time of timer recording Controller during timer recordingRecording Because it has no remote sensor, you cannot useVHS deck Basic PlaybackSet the tape speed Choose a programStart recording Pause/Resume recordingStill Picture/Frame-By-Frame 28 ENPlayback On the VCR Slow Motion On the VCRVariable Speed Search On the Remote Slow Motion On the RemoteIndex Search 30 ENRepeat Playback Next Function MemoryManual Tracking Adjust the tracking manuallySoundtrack Selection Override automatic tracking32 EN Instant Timer Recording ITRVHS deck Record One Program While Watching Another Press C.RESET before starting recording or playback Reset the counterElapsed Recording Time Indication Tape Remaining TimeRetake 34 ENSecond Audio Recording Playback Active Video CalibrationRecording Select the DV deck DV deckPress DV DV recording indicator lights on the VCR Picture may appear distorted during variable speed search 38 ENVS30U1a-EN.fm Page 39 Thursday, January 31, 2002 335 PM 40 EN Time Code DV deck Record One Program While Watching AnotherAccess the VCR Plus+ Program screen Access the PlusCode No. screenPrograming Select the deckGuide Channel Number Set Cable Box or DBS Receiver Users44 EN Access the Guide Channel Set screenGuide Channel Number Set Enter the Guide Channel numberEnter the receiving channel position number Guide Channel NumberAccess the PlusCode screen Express TimerAccess the Program screen Enter the program start timeTimer Programing You can program the timer while a regular recording isPerform Cable Box Control Setting on page 20 or DBS Anytime during steps 5 through 10, press WeeklyEngage the VCR’s timer mode Enter the program mode24HR Quick Programing 48 ENVS30U2-EN.fm Page 49 Thursday, January 31, 2002 338 PM To cancel or change a program Check, cancel and change programs50 EN Overlap each other on the VHS deck Select the program to modifySTART+/- , STOP+/- , DATE+/- , CH+/- , and/or SP/EP 52 EN Tape DubbingDubbing An Entire Cassette From DV to VHSPress DV, then press SP/LP p From VHS to DV Dubbing An Entire CassetteLocate the start point on the DV deck 54 ENPrepare the VHS deck for dubbing Pause dubbingLocate the start point on the VHS deck From VHS to DVPrepare the DV deck for dubbing 56 EN Player Recorder58 EN Set the input mode of recording deckStart the source player Start the recording deckExample When using this VCR as the source player Connection to a PC with DV connectorPC with DV connector Connection to another VCR60 EN Audio DubbingVHS Audio Dubbing DV Audio DubbingMake connections Start dubbing Engage the Audio Dubbing modeEnd Audio Dubbing Press A.DUB62 EN Insert EditingVHS Insert Editing Source tape Recording tapeAV Insert Editing VHS deck only Engage the Insert Editing modeMake connections Start Editing Prepare the recording cassette64 EN EditingProgram Editing Memory Programs x 8 scenesPrepare the source tape Locate the end pointStart Random Assemble Editing End Random Assemble Editing66 EN Remote A/B Code SwitchingChange the code for VCR To control two VCRs with the same RemoteOperate the TV Set the TV brand codeBefore performing the following steps TV CH +/-,TV VOL+/-, TV Muting, number keysOperate the Cable Box 68 ENTV CH +/-,number keys Control Press Stop 8, and release POWER. The DBSSet the DBS receiver brand code Operate the DBS receiverAccess the Mode Set screen Mode SetSelect the mode Select the mode settingWhen this function is set to on Mode SET72 EN VHS Mode SETVHS Mode SET For Example 74 ENSelecting either HI-FI L or HI-FI R Correction to the luminance signal to enhance detailsNormally select this. Hi-Fi sound is played back Sound on the left Hi-Fi channel is played back76 EN DV Mode SETPower Recording 78 ENDV deck VHS deck80 EN Timer RecordingPlayback Timer RecordingRecording 82 EN Changing VCR Plus+ Setting Cable box Cable Box Control SettingExpress Timer Programming Timer Warning Display Tuner SetFebruary 23, 2002 606 pm
Related manuals
Manual 21 pages 16.45 Kb

SR-VS30U specifications

The JVC SR-VS30U is a versatile and high-performance digital video recorder designed to cater to both professionals and enthusiasts in the video production industry. This machine stands out due to its ability to blend two recording formats: DV (digital video) and S-VHS, making it a dual-format powerhouse suitable for various applications. One of its main features is the dual-deck capability, allowing users to record and play back S-VHS tapes while simultaneously digitizing video in the DV format. This flexibility makes it an excellent tool for archiving older videotape formats as well.

In terms of image quality, the JVC SR-VS30U boasts impressive specs. It supports S-VHS quality tapes that can deliver exceptional resolution, enhanced color reproduction, and fine detail, especially when paired with high-quality source material. The unit is equipped with advanced digital processing technologies that optimize video playback and recording, ensuring minimal signal degradation.

One of the key technologies integrated into the SR-VS30U is the built-in DV input and output interface. This allows for quick transfers of digital video to and from computer systems, making it convenient for video editing and processing tasks. The unit is also compliant with the IEEE 1394 FireWire standard, which is essential for facilitating seamless integration with modern editing software and digital devices.

The SR-VS30U features an easy-to-navigate user interface, complete with an LCD display that provides clear indications of recording status and tape position. The well-structured controls enhance usability, making it user-friendly for those both familiar and unfamiliar with video production equipment.

In terms of additional features, the unit comes with a range of editing functions, including insert and assemble edits, allowing for precise control over the final output. It also supports a variety of playback features, including various playback speeds and frame-by-frame options, which are instrumental in refining edits or analyzing footage.

The JVC SR-VS30U demonstrates a robust build quality, ensuring longevity for rigorous usage in professional environments. With these features and its dual-format capabilities, the SR-VS30U is an ideal choice for anyone looking to bridge the gap between traditional S-VHS media and modern digital workflows, providing a reliable and efficient solution for video recording and editing needs.
Top Page Image Contents