JVC SR-VS30U manual Programing, Select the deck, Access the PlusCode No. screen

Page 42

Filename [VS30U_2-EN.fm]

VS30U_2-EN.fm Page 42 Saturday, February 23, 2002 5:57 PMMasterpage:Left

42 ENTIMER RECORDING

VCR Plus+® Timer

A

Turn on the VCR.

Programing

Press POWER.

B

 

Load a cassette.

With the VCR Plus+ system, timer programing is greatly simplified because each TV program has a corresponding code number which your VCR is able to recognize.

Before performing the VCR Plus+ Timer Programing:

●Make sure that the VCR’s built-in clock is set properly.

●Turn on the TV and select the AV mode.

Insert a VHS (or S-VHS) cassette with the record safety tab intact.

OR

Insert a Mini DV cassette with the erase protection switch set to “REC”.

C Select the deck.

Press S-VHSor DV.

T

W

3

1

2

 

 

2

4

5

6

7

8

9

 

0

4

1

DV

S-VHS

D Access the PlusCode No. screen.

Press PROG.

●The clock must be set to access

the PlusCode No. screen. If you have not set the clock, the Main Menu screen appears after an error message is displayed. Refer to “Plug & Play Set” ( pg. 14) or “Clock Set” ( pg. 16).

E Enter the PlusCode number.

Press the number keys to enter the PlusCode number of a program you wish to record. Then press OK.

●If you make a mistake, press

CANCEL and input the correct number.

F Access the VCR Plus+ Program screen.

The VCR Plus+ Program screen appears (if you’re just starting out and you have selected the VHS deck, “VHS PROGRAM 1” appears).

IMPORTANT

Make sure the channel position number you wish to record is displayed; if not, see “Changing VCR Plus+® Setting” on page 44 and set the Guide Channel number correctly.

●If the number you entered is invalid, “ERROR” appears on the TV screen. Press CANCEL and input a valid PlusCode number.

●If the “GUIDE CHANNEL SET” screen appears, see “ATTENTION” on page 43.

Page 42

February 23, 2002 5:57 pm

Page 41 Page 43
Image 42
Page 41 Page 43
Contents Video Cassette Recorder For Customer UseDear Customer Moisture CondensationImportant Product Safety Instructions Cleaning AccessoriesDamage Requiring Service Replacement PartsContents Front View IndexRear View Symbolic Mode Indicators Front Display PanelHow To Use RemoteTo recall an indication 10 ENON-SCREEN Display for VHS deck Press DISPLAY/OSDON-SCREEN Display for DV deck 12 EN Check the contentsConnect the VCR to power source Situate the VCR8To connect to a TV with S-VIDEO/AUDIO input connectors Video ConnectionYou can obtain high-quality S-VHS pictures Plug & Play Set Perform Plug & Play setupWhat to do if Plug & Play setting failed 14 ENLanguage 16 EN Access the Clock Set screenClock Set PreparationsSemiauto Clock Set Manual Clock Set18 EN Access the Tuner Set screenTuner Set Auto Channel SetAdd or skip the desired channels Access the Manual Channel Set screenManual Channel Set To add channelsInstalling Controller 20 ENAccess the Main Menu screen on the VCR Setting cable boxs brand and channelAccess the Cable Box Set screen Select the cable box’s channel22 EN Enter the cable box’s brandIf the cable box’s channel does not change to If your DBS receiver has audio/video output connectors How to control the DBS receiverDBS receiver Select the DBS receiver’s channel Setting DBS receivers brand and channelTurn on the DBS receiver If you do not use a DBS receiver, press rt until OFFRecording Controller during timer recordingScheduled start time of timer recording Because it has no remote sensor, you cannot useBasic Playback VHS deckStart recording Choose a programSet the tape speed Pause/Resume recordingPlayback On the VCR 28 ENStill Picture/Frame-By-Frame Slow Motion On the VCRSlow Motion On the Remote Variable Speed Search On the RemoteRepeat Playback 30 ENIndex Search Next Function MemorySoundtrack Selection Adjust the tracking manuallyManual Tracking Override automatic trackingInstant Timer Recording ITR 32 ENVHS deck Record One Program While Watching Another Elapsed Recording Time Indication Reset the counterPress C.RESET before starting recording or playback Tape Remaining Time34 EN RetakeSecond Audio Recording Active Video Calibration PlaybackRecording DV deck Select the DV deckPress DV DV recording indicator lights on the VCR 38 EN Picture may appear distorted during variable speed searchVS30U1a-EN.fm Page 39 Thursday, January 31, 2002 335 PM 40 EN DV deck Record One Program While Watching Another Time CodePrograming Access the PlusCode No. screenAccess the VCR Plus+ Program screen Select the deckCable Box or DBS Receiver Users Guide Channel Number SetGuide Channel Number Set Access the Guide Channel Set screen44 EN Enter the Guide Channel numberGuide Channel Number Enter the receiving channel position numberAccess the Program screen Express TimerAccess the PlusCode screen Enter the program start timePerform Cable Box Control Setting on page 20 or DBS You can program the timer while a regular recording isTimer Programing Anytime during steps 5 through 10, press Weekly24HR Quick Programing Enter the program modeEngage the VCR’s timer mode 48 ENVS30U2-EN.fm Page 49 Thursday, January 31, 2002 338 PM Check, cancel and change programs To cancel or change a program50 EN Select the program to modify Overlap each other on the VHS deckSTART+/- , STOP+/- , DATE+/- , CH+/- , and/or SP/EP Dubbing An Entire Cassette Tape Dubbing52 EN From DV to VHSFrom VHS to DV Dubbing An Entire Cassette Press DV, then press SP/LP pPrepare the VHS deck for dubbing 54 ENLocate the start point on the DV deck Pause dubbingFrom VHS to DV Locate the start point on the VHS deckPrepare the DV deck for dubbing 56 EN Recorder PlayerStart the source player Set the input mode of recording deck58 EN Start the recording deckPC with DV connector Connection to a PC with DV connectorExample When using this VCR as the source player Connection to another VCRVHS Audio Dubbing Audio Dubbing60 EN DV Audio DubbingEnd Audio Dubbing Engage the Audio Dubbing modeMake connections Start dubbing Press A.DUBVHS Insert Editing Insert Editing62 EN Source tape Recording tapeMake connections Start Editing Engage the Insert Editing modeAV Insert Editing VHS deck only Prepare the recording cassetteProgram Editing Memory Editing64 EN Programs x 8 scenesStart Random Assemble Editing Locate the end pointPrepare the source tape End Random Assemble EditingChange the code for VCR Remote A/B Code Switching66 EN To control two VCRs with the same RemoteBefore performing the following steps Set the TV brand codeOperate the TV TV CH +/-,TV VOL+/-, TV Muting, number keys68 EN Operate the Cable BoxTV CH +/-,number keys Set the DBS receiver brand code Press Stop 8, and release POWER. The DBSControl Operate the DBS receiverSelect the mode Mode SetAccess the Mode Set screen Select the mode settingMode SET When this function is set to onVHS Mode SET 72 ENVHS Mode SET 74 EN For ExampleNormally select this. Hi-Fi sound is played back Correction to the luminance signal to enhance detailsSelecting either HI-FI L or HI-FI R Sound on the left Hi-Fi channel is played backDV Mode SET 76 ENPower 78 EN RecordingVHS deck DV deckTimer Recording 80 ENTimer Recording PlaybackRecording 82 EN Express Timer Programming Cable box Cable Box Control SettingChanging VCR Plus+ Setting Timer Warning Display Tuner SetFebruary 23, 2002 606 pm
Related manuals
Manual 21 pages 16.45 Kb

SR-VS30U specifications

The JVC SR-VS30U is a versatile and high-performance digital video recorder designed to cater to both professionals and enthusiasts in the video production industry. This machine stands out due to its ability to blend two recording formats: DV (digital video) and S-VHS, making it a dual-format powerhouse suitable for various applications. One of its main features is the dual-deck capability, allowing users to record and play back S-VHS tapes while simultaneously digitizing video in the DV format. This flexibility makes it an excellent tool for archiving older videotape formats as well.

In terms of image quality, the JVC SR-VS30U boasts impressive specs. It supports S-VHS quality tapes that can deliver exceptional resolution, enhanced color reproduction, and fine detail, especially when paired with high-quality source material. The unit is equipped with advanced digital processing technologies that optimize video playback and recording, ensuring minimal signal degradation.

One of the key technologies integrated into the SR-VS30U is the built-in DV input and output interface. This allows for quick transfers of digital video to and from computer systems, making it convenient for video editing and processing tasks. The unit is also compliant with the IEEE 1394 FireWire standard, which is essential for facilitating seamless integration with modern editing software and digital devices.

The SR-VS30U features an easy-to-navigate user interface, complete with an LCD display that provides clear indications of recording status and tape position. The well-structured controls enhance usability, making it user-friendly for those both familiar and unfamiliar with video production equipment.

In terms of additional features, the unit comes with a range of editing functions, including insert and assemble edits, allowing for precise control over the final output. It also supports a variety of playback features, including various playback speeds and frame-by-frame options, which are instrumental in refining edits or analyzing footage.

The JVC SR-VS30U demonstrates a robust build quality, ensuring longevity for rigorous usage in professional environments. With these features and its dual-format capabilities, the SR-VS30U is an ideal choice for anyone looking to bridge the gap between traditional S-VHS media and modern digital workflows, providing a reliable and efficient solution for video recording and editing needs.
Top Page Image Contents