JVC SR-VS30U manual Select the DV deck, Press DV

Page 36

Filename [VS30U_1a-EN.fm]

VS30U_1a-EN.fm Page 36 Thursday, January 31, 2002 3:35 PMMasterpage:Left

36 ENPLAYBACK/RECORDING ON DV DECK

Basic Playback

 

 

A Load a cassette.

 

Make sure the window side is up, the rear label side is

(DV deck)

facing you and the arrow on the front of the cassette is

pointed toward the VCR.

Turn on the TV and select the AV mode.

●Do not apply too much pressure when inserting.

●The VCR’s power comes on automatically.

●If the erase protection switch is set to “SAVE”, playback begins automatically. It takes about 15 seconds until the playback picture appears.

B Select the DV deck.

Press DV.

1

3

2

●The DV button lights on the VCR.

C Find the program start point.

If the tape is advanced past the start point, press

REW (3) or turn the ADVANCED JOG dial to the left. To go forward, press FF (5) or turn the ADVANCED JOG dial to the right.

T

2

W

1

3

2

4 5 6

7 8 9

04

 

1

 

 

 

 

 

 

DV

 

 

 

S-VHS

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

D Start playback.

Press PLAY (4).

●The DV playback indicator lights on the VCR.

E Stop playback.

Press STOP (8). Then press EJECT () to remove the cassette.

●The DV playback indicator turns off.

Usable cassettes

Only cassettes marked

can be used with the DV

deck.

 

NOTE:

When you record a tape on the DV deck with the recording speed set to “LP”, it is recommended to play back the tape on this DV deck. Digital video recorder from other manufacturers may not be able to play back the tape properly.

Page 36

January 31, 2002 3:35 pm

Page 35 Page 37
Image 36
Page 35 Page 37
Contents Video Cassette Recorder For Customer UseDear Customer Moisture CondensationImportant Product Safety Instructions Accessories Damage Requiring ServiceCleaning Replacement PartsContents Front View IndexRear View Symbolic Mode Indicators Front Display PanelHow To Use Remote10 EN ON-SCREEN Display for VHS deckTo recall an indication Press DISPLAY/OSDON-SCREEN Display for DV deck Check the contents Connect the VCR to power source12 EN Situate the VCR8To connect to a TV with S-VIDEO/AUDIO input connectors Video ConnectionYou can obtain high-quality S-VHS pictures Perform Plug & Play setup What to do if Plug & Play setting failedPlug & Play Set 14 ENLanguage Access the Clock Set screen Clock Set16 EN PreparationsSemiauto Clock Set Manual Clock SetAccess the Tuner Set screen Tuner Set18 EN Auto Channel SetAccess the Manual Channel Set screen Manual Channel SetAdd or skip the desired channels To add channelsInstalling Controller 20 ENSetting cable boxs brand and channel Access the Cable Box Set screenAccess the Main Menu screen on the VCR Select the cable box’s channel22 EN Enter the cable box’s brandIf the cable box’s channel does not change to If your DBS receiver has audio/video output connectors How to control the DBS receiverDBS receiver Setting DBS receivers brand and channel Turn on the DBS receiverSelect the DBS receiver’s channel If you do not use a DBS receiver, press rt until OFFController during timer recording Scheduled start time of timer recordingRecording Because it has no remote sensor, you cannot useBasic Playback VHS deckChoose a program Set the tape speedStart recording Pause/Resume recording28 EN Still Picture/Frame-By-FramePlayback On the VCR Slow Motion On the VCRSlow Motion On the Remote Variable Speed Search On the Remote30 EN Index SearchRepeat Playback Next Function MemoryAdjust the tracking manually Manual TrackingSoundtrack Selection Override automatic trackingInstant Timer Recording ITR 32 ENVHS deck Record One Program While Watching Another Reset the counter Press C.RESET before starting recording or playbackElapsed Recording Time Indication Tape Remaining Time34 EN RetakeSecond Audio Recording Active Video Calibration PlaybackRecording DV deck Select the DV deckPress DV DV recording indicator lights on the VCR 38 EN Picture may appear distorted during variable speed searchVS30U1a-EN.fm Page 39 Thursday, January 31, 2002 335 PM 40 EN DV deck Record One Program While Watching Another Time CodeAccess the PlusCode No. screen Access the VCR Plus+ Program screenPrograming Select the deckCable Box or DBS Receiver Users Guide Channel Number SetAccess the Guide Channel Set screen 44 ENGuide Channel Number Set Enter the Guide Channel numberGuide Channel Number Enter the receiving channel position numberExpress Timer Access the PlusCode screenAccess the Program screen Enter the program start timeYou can program the timer while a regular recording is Timer ProgramingPerform Cable Box Control Setting on page 20 or DBS Anytime during steps 5 through 10, press WeeklyEnter the program mode Engage the VCR’s timer mode24HR Quick Programing 48 ENVS30U2-EN.fm Page 49 Thursday, January 31, 2002 338 PM Check, cancel and change programs To cancel or change a program50 EN Select the program to modify Overlap each other on the VHS deckSTART+/- , STOP+/- , DATE+/- , CH+/- , and/or SP/EP Tape Dubbing 52 ENDubbing An Entire Cassette From DV to VHSFrom VHS to DV Dubbing An Entire Cassette Press DV, then press SP/LP p54 EN Locate the start point on the DV deckPrepare the VHS deck for dubbing Pause dubbingFrom VHS to DV Locate the start point on the VHS deckPrepare the DV deck for dubbing 56 EN Recorder PlayerSet the input mode of recording deck 58 ENStart the source player Start the recording deckConnection to a PC with DV connector Example When using this VCR as the source playerPC with DV connector Connection to another VCRAudio Dubbing 60 ENVHS Audio Dubbing DV Audio DubbingEngage the Audio Dubbing mode Make connections Start dubbingEnd Audio Dubbing Press A.DUBInsert Editing 62 ENVHS Insert Editing Source tape Recording tapeEngage the Insert Editing mode AV Insert Editing VHS deck onlyMake connections Start Editing Prepare the recording cassetteEditing 64 ENProgram Editing Memory Programs x 8 scenesLocate the end point Prepare the source tapeStart Random Assemble Editing End Random Assemble EditingRemote A/B Code Switching 66 ENChange the code for VCR To control two VCRs with the same RemoteSet the TV brand code Operate the TVBefore performing the following steps TV CH +/-,TV VOL+/-, TV Muting, number keys68 EN Operate the Cable BoxTV CH +/-,number keys Press Stop 8, and release POWER. The DBS ControlSet the DBS receiver brand code Operate the DBS receiverMode Set Access the Mode Set screenSelect the mode Select the mode settingMode SET When this function is set to onVHS Mode SET 72 ENVHS Mode SET 74 EN For ExampleCorrection to the luminance signal to enhance details Selecting either HI-FI L or HI-FI RNormally select this. Hi-Fi sound is played back Sound on the left Hi-Fi channel is played backDV Mode SET 76 ENPower 78 EN RecordingVHS deck DV deckTimer Recording 80 ENTimer Recording PlaybackRecording 82 EN Cable box Cable Box Control Setting Changing VCR Plus+ SettingExpress Timer Programming Timer Warning Display Tuner SetFebruary 23, 2002 606 pm
Related manuals
Manual 21 pages 16.45 Kb

SR-VS30U specifications

The JVC SR-VS30U is a versatile and high-performance digital video recorder designed to cater to both professionals and enthusiasts in the video production industry. This machine stands out due to its ability to blend two recording formats: DV (digital video) and S-VHS, making it a dual-format powerhouse suitable for various applications. One of its main features is the dual-deck capability, allowing users to record and play back S-VHS tapes while simultaneously digitizing video in the DV format. This flexibility makes it an excellent tool for archiving older videotape formats as well.

In terms of image quality, the JVC SR-VS30U boasts impressive specs. It supports S-VHS quality tapes that can deliver exceptional resolution, enhanced color reproduction, and fine detail, especially when paired with high-quality source material. The unit is equipped with advanced digital processing technologies that optimize video playback and recording, ensuring minimal signal degradation.

One of the key technologies integrated into the SR-VS30U is the built-in DV input and output interface. This allows for quick transfers of digital video to and from computer systems, making it convenient for video editing and processing tasks. The unit is also compliant with the IEEE 1394 FireWire standard, which is essential for facilitating seamless integration with modern editing software and digital devices.

The SR-VS30U features an easy-to-navigate user interface, complete with an LCD display that provides clear indications of recording status and tape position. The well-structured controls enhance usability, making it user-friendly for those both familiar and unfamiliar with video production equipment.

In terms of additional features, the unit comes with a range of editing functions, including insert and assemble edits, allowing for precise control over the final output. It also supports a variety of playback features, including various playback speeds and frame-by-frame options, which are instrumental in refining edits or analyzing footage.

The JVC SR-VS30U demonstrates a robust build quality, ensuring longevity for rigorous usage in professional environments. With these features and its dual-format capabilities, the SR-VS30U is an ideal choice for anyone looking to bridge the gap between traditional S-VHS media and modern digital workflows, providing a reliable and efficient solution for video recording and editing needs.
Top Page Image Contents