Filename |
|
|
|
| EN 47 | |
|
|
| NOTES: | |
H Enter the program date. | ||||
| ● To | |||
Press |
| . . . anytime during steps 5 through 10, press WEEKLY | ||
| (number key “9”) for weekly serials or DAILY | |||
● The current date appears on the TV screen. The date you enter |
| key “8”) for daily serials (Monday – Friday). Either “WEEKLY” | ||
appears in its place. |
| or “DAILY” appears on the TV screen. Pressing the button | ||
|
|
| again makes the corresponding indication disappear. | |
I Enter the channel position. |
| ● You can program each deck to | ||
| programs. If you try to program the VCR to record a seventh, | |||
Press |
| “PROGRAM FULL” appears on the TV screen. To record the | ||
| extra program, you must first cancel any unnecessary | |||
● If you are using a DBS receiver, see “ATTENTION FOR DBS |
| programs ( pg. 50). | ||
RECEIVER USERS” in the right column. |
| ● In case of a power failure after programing, the VCR’s memory | ||
● Holding down CH +/– rapidly scans through the channels. |
| backup keeps your selections for approximately 10 minutes. | ||
|
|
| ● Programs that start after midnight must have the next day’s | |
J Set the tape speed. | ||||
| date. | |||
| ● You can program the timer while a regular recording is in | |||
For the VHS deck |
| progress; the | ||
| ● It is not possible to | |||
Press SP/EP (p). |
| |||
| VHS deck and the DV deck simultaneously. | |||
For the DV deck |
| ● During timer recording, it is not possible to change the | ||
| recording deck (VHS or DV). | |||
Press SP/LP (p). |
| |||
| ● If the times that are programed for recording on the DV deck | |||
|
|
| ||
|
|
| and on the VHS deck overlap, the earlier start time takes | |
K Return to the normal screen. | ||||
| precedence. If the start times are the same, the VHS deck takes | |||
| precedence. | |||
|
|
| ||
Press PROG or OK. “PROGRAM COMPLETED” appears |
|
| ||
on the TV screen for about 5 seconds, then the normal |
| Cable Box or DBS Receiver Users | ||
screen appears. If “PROGRAM NOT COMPLETED |
| To | ||
PROGRAM OVERLAP” appears on the TV screen, see |
| Timer Programing: | ||
page 51. |
| A Perform “Cable Box Control Setting” on page 20 or “DBS | ||
● Repeat steps 3 – 11 for each additional program. |
| Receiver Control Setting” on page 23. | ||
| B Perform steps 1 – 12. | |||
|
|
| ||
|
|
| C Leave the power of cable box or DBS receiver on. | |
L Engage the VCR’s timer mode. | ||||
|
| |||
|
|
Press TIMER. The VCR turns off automatically and “#” appears on the front display panel.
●To disengage the timer mode, press TIMER again.
ATTENTION FOR DBS RECEIVER USERS
If you are using a DBS receiver (unless “DBS RECEIVER SET” is set to “OFF” pg. 24), the band indication (TV, CATV or DBS) appears under the channel number indication.
TV: To
on the VCR. CATV: To
TV broadcast received on the VCR, or through a
cable box (unless “CABLE BOX SET” is set
to “OFF” pg. 21).
DBS: To
NOTE:
If “BAND” is set to “TV” on the Tuner Set screen ( pg. 18) and “CABLE BOX SET” is set to “OFF” on the Cable Box Set screen ( pg. 21), “CATV” will not be displayed on the Program screen; If “BAND” is set to “CATV” or “CABLE BOX SET” is set to “ON”, “TV” will not be displayed.
If the channel number entered requires that the band be set, “7=DBS” is displayed on the screen.
If this happens, press the number key “7 (DBS)” to select “DBS”.
Page 47
January 31, 2002 3:37 pm