JVC SR-VS30U Plug & Play Set, 14 EN, Auto Clock Set/Auto Tuner Set, Perform Plug & Play setup

Page 14

Filename [VS30U_1a-EN.fm]

 

VS30U_1a-EN.fm Page 14 Thursday, January 31, 2002 3:35 PM

Masterpage:Left

14 EN

INITIAL SETTINGS

Plug & Play Set

Auto Clock Set/Auto Tuner Set

ATTENTION:

●If you use a cable box, Plug&Play will not function; set the clock and tuner channels separately. ( pg. 16 – 19)

●Depending on areas or reception conditions, the VCR may not receive the Auto clock setting data from the PBS channel. If this function is taking a considerable amount of time, it may be necessary to perform the Semiauto or Manual Clock Set procedure.

This VCR sets the clock and tuner channels automatically when AC power cord is first connected to an AC outlet. The antenna cable must be connected for the Plug & Play setting.

The time and date can be set automatically by the clock setting data transmitted from one of the regular TV broadcast channels. We call this TV channel the “host channel” and it is a PBS channel in your area.

A Perform Plug & Play setup.

Connect the antenna cable to the VCR ( pg. 12). Then connect the AC power cord to an AC outlet. Do not turn on the VCR.

The clock and tuner channels will be set automatically.

1

3

2

NOTES:

●Auto Clock Set is performed first.

“Auto” blinks on the front display panel during Auto Clock Set.

●Auto Channel Set is performed next. Auto Channel Set scans all the channels that are receivable by your VCR. During Auto Channel Set, the channel numbers are displayed as they are scanned and set.

●When Plug & Play setting has been complete successfully, the correct clock time is displayed. If you perform Plug & Play

setting successfully, there is no need to perform “Clock Set”

( pg. 16) and “Tuner Set” ( pg. 18). If, however, you want

to add or delete channels, refer to “Manual Channel Set” ( pg. 19).

During Initial Auto Clock Set

During Auto Channel Set

Plug&Play Completed

“Auto” blinks.

The channel numbers are displayed

The current time is displayed.

 

as they are scanned and set.

 

* If an incorrect clock time or “– –:– –” appears on the display panel, see “What to do if Plug & Play setting failed” below.

INFORMATION

●If “AUTO CLOCK” is set to “ON” ( pg. 17), the clock will be adjusted automatically by the host channel every hour (except 11:00 PM, midnight, 1:00 AM and 2:00 AM) using the incoming PBS channel clock setting data. (This automatic clock

adjustment can only be performed when the VCR is turned off. The clock will be adjusted just on these hours — on the time displayed on the front display panel, not on the actual real time.) The default setting of “AUTO CLOCK” is “ON”. ( pg. 17)

●If the memory backup fails, because a power outage occurs or because the AC power cord is unplugged, Plug & Play will be performed when power is restored to the VCR.

What to do if Plug & Play setting failed

●If an incorrect time is displayed on the front display panel, you may be receiving the clock setting data of a PBS channel from an adjacent time zone, or an incorrect PBS channel from a cable TV system. In this case, perform “Semiauto Clock Set” ( pg. 17) or “Manual Clock Set” ( pg. 17).

●If “– –:– –” appears on the front display panel, your antenna cable may not be connected to the VCR or there may not be a Host PBS signal available in your area. Ensure that the antenna cable is connected correctly. Then turn on and off the VCR; the Plug &

Play setting will be automatically reactivated. If Plug & Play setting is not performed though the antenna cable is connected correctly, perform “Manual Clock Set” ( pg. 17) and “Auto Channel Set” ( pg. 18) or “Manual Channel Set” ( pg. 19).

Page 14

January 31, 2002 3:35 pm

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Video Cassette Recorder For Customer UseDear Customer Moisture CondensationImportant Product Safety Instructions Cleaning AccessoriesDamage Requiring Service Replacement PartsContents Front View IndexRear View Symbolic Mode Indicators Front Display PanelHow To Use RemoteTo recall an indication 10 ENON-SCREEN Display for VHS deck Press DISPLAY/OSDON-SCREEN Display for DV deck 12 EN Check the contentsConnect the VCR to power source Situate the VCRYou can obtain high-quality S-VHS pictures 8To connect to a TV with S-VIDEO/AUDIO input connectorsVideo Connection Plug & Play Set Perform Plug & Play setupWhat to do if Plug & Play setting failed 14 ENLanguage 16 EN Access the Clock Set screenClock Set PreparationsSemiauto Clock Set Manual Clock Set18 EN Access the Tuner Set screenTuner Set Auto Channel SetAdd or skip the desired channels Access the Manual Channel Set screenManual Channel Set To add channelsInstalling Controller 20 ENAccess the Main Menu screen on the VCR Setting cable boxs brand and channelAccess the Cable Box Set screen Select the cable box’s channelIf the cable box’s channel does not change to 22 ENEnter the cable box’s brand DBS receiver If your DBS receiver has audio/video output connectorsHow to control the DBS receiver Select the DBS receiver’s channel Setting DBS receivers brand and channelTurn on the DBS receiver If you do not use a DBS receiver, press rt until OFFRecording Controller during timer recordingScheduled start time of timer recording Because it has no remote sensor, you cannot useBasic Playback VHS deckStart recording Choose a programSet the tape speed Pause/Resume recordingPlayback On the VCR 28 ENStill Picture/Frame-By-Frame Slow Motion On the VCRSlow Motion On the Remote Variable Speed Search On the RemoteRepeat Playback 30 ENIndex Search Next Function MemorySoundtrack Selection Adjust the tracking manuallyManual Tracking Override automatic trackingVHS deck Record One Program While Watching Another Instant Timer Recording ITR32 EN Elapsed Recording Time Indication Reset the counterPress C.RESET before starting recording or playback Tape Remaining TimeSecond Audio Recording 34 ENRetake Recording Active Video CalibrationPlayback Press DV DV deckSelect the DV deck DV recording indicator lights on the VCR 38 EN Picture may appear distorted during variable speed searchVS30U1a-EN.fm Page 39 Thursday, January 31, 2002 335 PM 40 EN DV deck Record One Program While Watching Another Time CodePrograming Access the PlusCode No. screenAccess the VCR Plus+ Program screen Select the deckCable Box or DBS Receiver Users Guide Channel Number SetGuide Channel Number Set Access the Guide Channel Set screen44 EN Enter the Guide Channel numberGuide Channel Number Enter the receiving channel position numberAccess the Program screen Express TimerAccess the PlusCode screen Enter the program start timePerform Cable Box Control Setting on page 20 or DBS You can program the timer while a regular recording isTimer Programing Anytime during steps 5 through 10, press Weekly24HR Quick Programing Enter the program modeEngage the VCR’s timer mode 48 ENVS30U2-EN.fm Page 49 Thursday, January 31, 2002 338 PM 50 EN Check, cancel and change programsTo cancel or change a program START+/- , STOP+/- , DATE+/- , CH+/- , and/or SP/EP Select the program to modifyOverlap each other on the VHS deck Dubbing An Entire Cassette Tape Dubbing52 EN From DV to VHSFrom VHS to DV Dubbing An Entire Cassette Press DV, then press SP/LP pPrepare the VHS deck for dubbing 54 ENLocate the start point on the DV deck Pause dubbingPrepare the DV deck for dubbing From VHS to DVLocate the start point on the VHS deck 56 EN Recorder PlayerStart the source player Set the input mode of recording deck58 EN Start the recording deckPC with DV connector Connection to a PC with DV connectorExample When using this VCR as the source player Connection to another VCRVHS Audio Dubbing Audio Dubbing60 EN DV Audio DubbingEnd Audio Dubbing Engage the Audio Dubbing modeMake connections Start dubbing Press A.DUBVHS Insert Editing Insert Editing62 EN Source tape Recording tapeMake connections Start Editing Engage the Insert Editing modeAV Insert Editing VHS deck only Prepare the recording cassetteProgram Editing Memory Editing64 EN Programs x 8 scenesStart Random Assemble Editing Locate the end pointPrepare the source tape End Random Assemble EditingChange the code for VCR Remote A/B Code Switching66 EN To control two VCRs with the same RemoteBefore performing the following steps Set the TV brand codeOperate the TV TV CH +/-,TV VOL+/-, TV Muting, number keysTV CH +/-,number keys 68 ENOperate the Cable Box Set the DBS receiver brand code Press Stop 8, and release POWER. The DBSControl Operate the DBS receiverSelect the mode Mode SetAccess the Mode Set screen Select the mode settingMode SET When this function is set to onVHS Mode SET 72 ENVHS Mode SET 74 EN For ExampleNormally select this. Hi-Fi sound is played back Correction to the luminance signal to enhance detailsSelecting either HI-FI L or HI-FI R Sound on the left Hi-Fi channel is played backDV Mode SET 76 ENPower 78 EN RecordingVHS deck DV deckTimer Recording 80 ENRecording Timer RecordingPlayback 82 EN Express Timer Programming Cable box Cable Box Control SettingChanging VCR Plus+ Setting Timer Warning Display Tuner SetFebruary 23, 2002 606 pm
Related manuals
Manual 21 pages 16.45 Kb

SR-VS30U specifications

The JVC SR-VS30U is a versatile and high-performance digital video recorder designed to cater to both professionals and enthusiasts in the video production industry. This machine stands out due to its ability to blend two recording formats: DV (digital video) and S-VHS, making it a dual-format powerhouse suitable for various applications. One of its main features is the dual-deck capability, allowing users to record and play back S-VHS tapes while simultaneously digitizing video in the DV format. This flexibility makes it an excellent tool for archiving older videotape formats as well.

In terms of image quality, the JVC SR-VS30U boasts impressive specs. It supports S-VHS quality tapes that can deliver exceptional resolution, enhanced color reproduction, and fine detail, especially when paired with high-quality source material. The unit is equipped with advanced digital processing technologies that optimize video playback and recording, ensuring minimal signal degradation.

One of the key technologies integrated into the SR-VS30U is the built-in DV input and output interface. This allows for quick transfers of digital video to and from computer systems, making it convenient for video editing and processing tasks. The unit is also compliant with the IEEE 1394 FireWire standard, which is essential for facilitating seamless integration with modern editing software and digital devices.

The SR-VS30U features an easy-to-navigate user interface, complete with an LCD display that provides clear indications of recording status and tape position. The well-structured controls enhance usability, making it user-friendly for those both familiar and unfamiliar with video production equipment.

In terms of additional features, the unit comes with a range of editing functions, including insert and assemble edits, allowing for precise control over the final output. It also supports a variety of playback features, including various playback speeds and frame-by-frame options, which are instrumental in refining edits or analyzing footage.

The JVC SR-VS30U demonstrates a robust build quality, ensuring longevity for rigorous usage in professional environments. With these features and its dual-format capabilities, the SR-VS30U is an ideal choice for anyone looking to bridge the gap between traditional S-VHS media and modern digital workflows, providing a reliable and efficient solution for video recording and editing needs.
Top Page Image Contents