Master TV Setup (Cont.)
(Continued from previous page)
3.(Optional) Run Auto Tuning.
Important: If you intend to use a USB memory device / .tlx file for cloning purposes, DO NOT run Auto Tuning. If you Teach a .tlx file with an
a)To search for all available analog and digital channels, go to the Channel Menu, select the Auto Tuning option, and follow the
b)Use the Channel Edit option in the Channel Menu to edit the channel lineup, as necessary, to include only free to guest
• Add/delete channels per your system requirements.
CHANNEL | Move | Enter |
Auto Tuning |
|
|
Manual Tuning |
|
|
Channel Edit |
|
|
Channel Label |
|
|
(Optional) Use Channel Menu options to run Auto Tuning, edit channels, and select channel icons.
•Use the Channel Label option in the Channel Menu to select the appropriate trademark/icon for each channel’s
Note: If you intend to clone the PTC and Installer Menu item 103 ATSC TUNE MODE is set for Physical Channel tuning (default and recommended setting), channels with minor channel numbers higher than 255 will not transfer correctly in step 5. If item 103 is set for Virtual Channel tuning and either the major or minor channel numbers are higher than 255, the channel(s) will not transfer correctly in step 5.
Note: If you intend to clone the PTC, you can add the channel icons in this step or as described in step 6. Also in step 6, you can add custom text labels for channels without icons.
4.Determine the next appropriate step according to the cloning method you intend to use.
•If using a USB memory device / .tll file or a clone programmer: Continue with step 5. You must perform this step to transfer the TV setup menu settings to the PTC in order to clone the PTC successfully.
•If using a .tlx file: Proceed to step 7 to verify the TV setup. (Steps 5 and 6 are not applicable for .tlx files.)
(Continued on next page)
13 |