LG Electronics 47LD555H IP Environment Setup, Access the IP Environment Menu, Network Setup

IP Environment Setup

The IP Environment Menu enables you to set up network features of the TV. Like the Installer Menu, the IP Environment Menu is editable (with the Installer Remote) only if the TV is in Pass-through or Application Tuning Mode and read-only when the TV is not in either of these modes.

Access the IP Environment Menu

1.Use the Installer Remote to enter the Installer Menu: Press MENU repeatedly until the on-screen menu display no longer toggles, and then press 9-8-7-6+ ENTER.

2.Navigate to Installer Menu item 119 DATA CHANNEL, and press 2-5-3+ MENU to launch the IP Environment Menu (see sample displays below).

Use the Up/Down arrow keys on the Installer Remote to select the desired menu option—Network Setup, Offset Setup, or Pro:Centric—and then press ENTER. Refer to the following sections for information on each of the IP Environment setup options.

Network Setup

If the TV is connected to a network with a DHCP server, by default the server will automatically assign an IP address to the TV. The Network Setup Menu options enable you to set up static IP/network connections or to revert from static to DHCP settings. Use the Up/Down arrow keys to navigate between fields.

1.With Network Setup selected, use the Left/Right arrow keys on the Installer Remote to select Static or DHCP in the Mode field.

2.(Static IP/network connections only) Complete the IP Address, Subnet Mask, Gateway, DNS1, and DNS2 fields. Either key in or use the Left/Right arrow keys to select the appropriate values.

3.When you have completed all fields as necessary, navigate to Apply, and then press ENTER.

4.Press MENU to return to TV viewing, or press RETURN to return to the previous menu level.

IP Environment				Move				Prev.
Network Setup	Mode	►	DHCP			►
	IP Address	0	0		0		0
	Subnet Mask	0	0		0		0
Offset Setup	Gateway	0	0		0		0
	DNS1	0	0		0		0
	DNS2
		0	0		0		0
Pro:Centric	MAC Address :
						Apply
	e8:5b:5b:63:97:3e

Offset Setup

If necessary, due to an audio and/or video stream delay, the Offset Setup Menu options enable you to compensate for synchronization irregularities by allowing audio PTS, video PTS, and PCR offset modifications. Note that any offset modifications should be performed by qualified personnel only.

1.With Offset Setup selected, use the Up/Down arrow keys on the Installer Remote to navigate to the appropriate field: Audio PTS Offset, Video PTS Offset, or PCR Offset.

2.Use the Left/Right arrow keys to set the appropriate offset value for the selected field. Offset values are represented in 10 ms intervals to 500 ms or -500 ms.

3.When you have completed all modifications as required, press MENU to return to TV viewing, or press RETURN to return to the previous menu level.

IP Environment			Move	Prev.
	Audio PTS Offset
Network Setup		►	0	►
	Video PTS Offset		0
	PCR Offset
			0
Offset Setup
Pro:Centric

206-4200 45