LG Electronics 47LD555H, 42LD665H, 37LD555H, 37LD665H, 32LD665H, 32LD555H, 32LD660H From previous

Page 36

FTG Mode via CPU (Cont.)

(Continued from previous page)

4.To add an FTG Channel Map, click >> under FTG Channel Map to copy the current Mapped RF Channels and Mapped IP Channels to the FTG Configuration List.

Note: If you make any change(s) in the FTG Channel Map Configuration Utility to the current data to be included in the FTG Configuration List, you will need to recopy the FTG Channel Map to the FTG Configuration List.

5.(Optional) Load default FTG Installer Menu settings for the TV:

Click the down arrow at the right of the Chassis field under Installer Menu Templates, and select the appropriate option (depending on the TV type) from the drop-down list of available models.

Click the Load button.

Use the FTG Installer Menu Configuration Utility to modify settings, if necessary. Then, return to the FTG File Manager main screen.

6.To add FTG Installer Menu settings, click >> under FTG Installer Menu Settings to copy the current settings to the FTG Configuration List.

Note: If you make any change(s) in the FTG Installer Menu Configuration Utility to the current data to be included in the FTG Configuration List, you will need to recopy the FTG Installer Menu settings to the FTG Configuration List.

7.Click the Save button above the FTG Configuration List to save its contents (including TV setup menu settings, if present) to an FTG Configuration (.tlx) file on the PC’s hard drive for later use (default folder path is C:\Program Files\Zenith\FTG\TLX).

8.Transfer the FTG Configuration file to a USB memory device, and proceed to “Teaching FTG Configuration to a TV” on the following page to transfer the FTG Configuration file to an LD660H/ LD665H or LV555H TV.

36

206-4200

Image 36
Contents 206-4200 Rev B Copyright 2011, LG Electronics U.S.A., IncFor Customer Support/Service, please call­ Power Cord OverloadingGrounding Disconnect DeviceCleaning Outdoor Antenna GroundingAntenna Grounding According to NEC, ANSI/NFPA Transporting ProductTable of Contents Commercial Mode Overview Setup ChecklistPass-through Mode FTG Mode Remote Management in FTG ModeExternal MPI Control CloningProCentric TV Interactive Menu Features ProCentric OperationProCentric Setup FTG Mode via CPUApplication Tuning Mode ProCentric Modes of OperationInstaller Remote Control Typical Key Functions EnterMaster TV Setup Clonable TV Setup Menu FeaturesBefore You Begin Cloning MethodsMaster TV Setup Procedure Set Installer Menu itemsSet up TV features Channel Verify the TV setup Lock the channel lineupInstaller Menu Accessing the Installer MenuUsing the Installer Menu Exiting the Installer Menu and Activating UpdatesInstaller Menu Items 000 through Brief Description of Function and CommentsInstaller Menu Items 075 through Rear RGB ENDetailed Descriptions of Installer Menu Items Installer SequenceMute Disable Sleep TimerFeature Level Caption LockAUX Status Atsc Tune Mode ProcentricBack Lighting Atsc BandPower Savings Start Minor ChannelData Channel Channel Icons / Custom Text Labels 2-5-4 + Menu Mode To perform channel editing/labelingCloning Overview Before you begin cloningUSB Cloning Procedures Learn Setup from Master TVUSB Cloning Notes Teach Master TV Setup to Target TV Learn From TV TLL Teach To TV TLL Clone Programmer Cloning Procedures TLL-1100A Cloning NotesOptional Set the Clock LT2002 Cloning Notes LT2002 Clone ProgrammerFrom previous FTG Mode of Operation Overview FTG Mode via CPU or EBLFTG Mode via EBL Determining the TV Operating Mode TV Setup MenusFunction Menu FTG Mode via CPU From previous Teaching FTG Configuration to a TV Learning an FTG Configuration File from a TV Optional Manual Configuration / TV Setup Run Auto Tuning Channel SearchFTG Mode via EBL Local Configuration LD660H/LD665H Jack PanelLV555H Jack Panel FTG Configuration List FTG File Manager Utilities OverviewFTG File Manager Main Screen CLEAR/SAVEFTG Channel Map Configuration Utility RF Channel MapIP Channel Map EDIT/ADD MAPUpdate FTG Channel Map EditorADD ExitFTG Installer Menu Configuration Utility Configuration SettingsIP Environment Setup Access the IP Environment MenuNetwork Setup Offset SetupIP Environment Remote Jack Pack / TV Connections & Setup Remote Jack Pack SetupTV Connections Checking the Software Versions Upgrading TV/PTC SoftwareSplash Screen Image File Guidelines Downloading a Splash Screen ImageReference Power Consumption Settings 32/37/42LD660H & 32/37/42LD665H32/37/42/47/55LV555H 45.2 38%Reference TV Camport Auto Sense Operation Camport Side Video Functionality ControlCamport Operation Pass-through Camport Operation FTG or PPVReference TV Aux Input Configuration EnableReference b-LAN Setup & Overview TV Standby State TV Power On State001 Default Off PowerReference RJP Model List and Input Auto-sensing Hierarchy RJP Model List Legacy Models Scaler ModelsRJP Input Auto-sensing Hierarchy Priority Video Audio Reference Resetting Factory Defaults on the TVs Installer Menu Item 117 Fact DefaultAdditional FTG Mode via CPU Options Additional FTG Mode via EBL OptionsReference TV Zone Restrictions EnterReference LD660H/LD665H Rear Jack Panel Reference LV555H Rear Jack Panel AntennaRGB in PC Audio in RGB/DVI Component Reference Side Connections Panel LD660H/LD665H TVsLV555H TVs 2 InputReference RF Antenna Connection LD660H/LD665H TVs onlyAntenna in Connect to Antenna/ Catv Troubleshooting General TroubleshootingTroubleshooting Flowchart Controller Quick CheckCommercial Mode Check / FTG Operation Troubleshooting FTG Operation TroubleshootingSymptom Possible Causes Solutions Clone Programmer Troubleshooting Symptom Possible Causes Possible SolutionsClone Programmer Master and Target TVsGlossary of Terms Document Revision History / Notes Document Revision HistoryDate Description For Customer Support/Service, please call­