LG Electronics 37LD555H, 47LD555H, 42LD665H, 37LD665H Learning an FTG Configuration File from a TV

Page 38

FTG Mode via CPU (Cont.)

Learning an FTG Configuration File from a TV

To ensure that Pro:Idiom decryption is enabled, it is recommended that you create an FTG Configuration file using the FTG File Manager as described on pages 35 to 36. However, if necessary, this option enables you to save (Learn) an FTG Configuration file from an LD660H/LD665H or LV555H TV to a USB memory device.

Notes: • The option to save (Learn) an FTG Configuration file from a TV may be desirable or required in either of the following situations:

−−If you want to save customized TV setup menu settings to the FTG Configuration file (in addition to the FTG Channel Map and FTG Installer Menu settings).

−−If you do not know the RF channels at the site.

If the TV is NOT already in FTG Mode, you may need to perform some manual configuration on the TV before you start this procedure (see “Optional Manual Configuration / TV Setup” on following page).

1.Plug a USB memory device into the USB IN port on the TV.

2.Press MENU on the Installer Remote to display the TV setup menus (TV is in Pass-through Mode) or the Function Menu (TV is already in FTG Mode).

3.Use the arrow navigation keys to select/highlight either the Option menu icon from the TV setup menus or the Lock menu icon from the Function Menu. Then, press the number “7” key a total of seven times to display the USB Download Menu.

4.To gain access to the Learn From TV options in the USB Down- load Menu, key in the password used to enter the Installer Menu (Example: Press 9-8-7-6).

5.Use the Up/Down arrow keys to select Learn From TV (TLX), and then press ENTER.

6.To differentiate this .tlx file from others, you can use the Up/Down arrow keys to change the last five digits of the filename. Press ENTER when you are ready to initiate Learning.

The TV will show Learning completion progress in a new window. Do NOT remove the USB device until Learning is complete. When Learning is complete, the USB Download Menu will reappear on screen.

7.When you are finished, remove the USB memory device.

Note: It is highly recommended that you open this FTG Configuration file in the FTG File Manager—BEFORE transferring (Teaching) the file to any TVs—to verify FTG Channel Map and FTG Installer Menu settings and enable Pro:Idiom decryption by marking Encrypted channels. This will also enable you to confirm and add channel attributes, labels, etc.

USB Download Menu

Upgrade TV Software

Upgrade PTC Software

Teach To TV (TLL)

Teach To TV (TLX)

Learn From TV (TLL)

Learn From TV (TLX)

Return Enter

Learn From TV (TLX)

Select the file name and press OK to start

 

 

 

 

 

 

 

xxLD66xH-UA00005.TLX -

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Return

Enter

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

! Learn From TV

25%

 

 

 

 

 

 

 

 

UPDATING...

Do not unplug!

38

206-4200

Image 38
Contents 206-4200 Rev B Copyright 2011, LG Electronics U.S.A., IncFor Customer Support/Service, please call­ Grounding Power CordOverloading Disconnect DeviceAntenna Grounding According to NEC, ANSI/NFPA CleaningOutdoor Antenna Grounding Transporting ProductTable of Contents Pass-through Mode Commercial Mode OverviewSetup Checklist External MPI Control FTG ModeRemote Management in FTG Mode CloningProCentric TV Interactive Menu Features ProCentric OperationApplication Tuning Mode ProCentric SetupFTG Mode via CPU ProCentric Modes of OperationInstaller Remote Control Typical Key Functions EnterBefore You Begin Master TV SetupClonable TV Setup Menu Features Cloning MethodsSet up TV features Master TV Setup ProcedureSet Installer Menu items Channel Verify the TV setup Lock the channel lineupUsing the Installer Menu Installer MenuAccessing the Installer Menu Exiting the Installer Menu and Activating UpdatesInstaller Menu Items 000 through Brief Description of Function and CommentsInstaller Menu Items 075 through Rear RGB ENDetailed Descriptions of Installer Menu Items Installer SequenceFeature Level Mute DisableSleep Timer Caption LockAUX Status Back Lighting Atsc Tune ModeProcentric Atsc BandData Channel Power SavingsStart Minor Channel Channel Icons / Custom Text Labels 2-5-4 + Menu Mode To perform channel editing/labelingCloning Overview Before you begin cloningUSB Cloning Notes USB Cloning ProceduresLearn Setup from Master TV Teach Master TV Setup to Target TV Learn From TV TLL Teach To TV TLL Clone Programmer Cloning Procedures TLL-1100A Cloning NotesOptional Set the Clock LT2002 Cloning Notes LT2002 Clone ProgrammerFrom previous FTG Mode via EBL FTG Mode of Operation OverviewFTG Mode via CPU or EBL Function Menu Determining the TV Operating ModeTV Setup Menus FTG Mode via CPU From previous Teaching FTG Configuration to a TV Learning an FTG Configuration File from a TV Optional Manual Configuration / TV Setup Run Auto Tuning Channel SearchLV555H Jack Panel FTG Mode via EBL Local ConfigurationLD660H/LD665H Jack Panel FTG File Manager Main Screen FTG Configuration ListFTG File Manager Utilities Overview CLEAR/SAVEIP Channel Map FTG Channel Map Configuration UtilityRF Channel Map EDIT/ADD MAPADD UpdateFTG Channel Map Editor ExitFTG Installer Menu Configuration Utility Configuration SettingsNetwork Setup IP Environment SetupAccess the IP Environment Menu Offset SetupIP Environment TV Connections Remote Jack Pack / TV Connections & SetupRemote Jack Pack Setup Checking the Software Versions Upgrading TV/PTC SoftwareSplash Screen Image File Guidelines Downloading a Splash Screen ImageReference Power Consumption Settings 32/37/42LD660H & 32/37/42LD665H32/37/42/47/55LV555H 45.2 38%Camport Operation Pass-through Reference TV Camport Auto Sense OperationCamport Side Video Functionality Control Camport Operation FTG or PPVReference TV Aux Input Configuration Enable001 Default Off Reference b-LAN Setup & OverviewTV Standby State TV Power On State PowerRJP Input Auto-sensing Hierarchy Priority Video Audio Reference RJP Model List and Input Auto-sensing HierarchyRJP Model List Legacy Models Scaler Models Additional FTG Mode via CPU Options Reference Resetting Factory Defaults on the TVsInstaller Menu Item 117 Fact Default Additional FTG Mode via EBL OptionsReference TV Zone Restrictions EnterReference LD660H/LD665H Rear Jack Panel RGB in PC Audio in RGB/DVI Component Reference LV555H Rear Jack PanelAntenna LV555H TVs Reference Side Connections PanelLD660H/LD665H TVs 2 InputAntenna in Connect to Antenna/ Catv Reference RF Antenna ConnectionLD660H/LD665H TVs only Troubleshooting General TroubleshootingTroubleshooting Flowchart Controller Quick CheckSymptom Possible Causes Solutions Commercial Mode Check / FTG Operation TroubleshootingFTG Operation Troubleshooting Clone Programmer Clone Programmer TroubleshootingSymptom Possible Causes Possible Solutions Master and Target TVsGlossary of Terms Date Description Document Revision History / NotesDocument Revision History For Customer Support/Service, please call­