Peerless Industries PP740-S manual Attaching Tilt Knob to Wall Mount optional

Page 9

Attaching Tilt Knob to Wall Mount (optional)

4

For tool-less tilt adjustment, replace one 1/4-20 x

1/2" screw with tilt knob (O). Hand thread tilt knob

(O) into wall mount (A) leaving 1/4" exposed thread as shown in front view.

NOTE: Be sure four 1/4-20 x 1/2" screws have 1/4" exposed thread.

CAUTION

• Do not tighten screws with excessive force. Overtightening can cause damage to mount. Tighten screws to 20 in. • lb (2.26 N.M.) maximum torque.

Be careful not to pinch fingers when opening and closing mount from the wall.

Installing and Removing Flat Panel Screen

REPLACE LEFT OR RIGHT

1/4-20 x 1/2" SCREW WITH TILT KNOB

1/4"

O

1/4"

A

FRONT VIEW

5

To attach screen to wall mount (A), hook tilt bracket

onto four 1/4-20 x 1/2" screws.

A

Adjust screen to desired tilt (15° forward,

5° backward), then tighten four 1/4-20 x 1/2" screws.

Hold screen securely to remove from mount. Loosen four 1/4-20 x 1/2" screws and lift screen away to disengage tilt bracket from mount.

1/4-20 X 1/2"

SCREWS

WARNING

Always use an assistant or mechanical lifting equip- ment to safely lift and position the flat panel screen.

1/4-20 X 1/2"

SCREWS

9 of 46

ISSUED: 01-15-08 SHEET #: 095-9282-2 06-12-09

Image 9
Contents Features Table of Contents Tools Needed for AssemblyParts List Screws Installation to Wood Stud Wall Always attach concrete expansion anchors directly to Installation to Solid Concrete and Cinder BlockShown For Vesa 200 x 100 Mounting PatternFor Vesa 200 x 200 Mounting Pattern For Vesa 75 Mounting Pattern Bracket M to back of screen using four M4 xChoose hole pattern as shown below. Attach hook For Vesa 100 Mounting PatternAttaching Tilt Knob to Wall Mount optional Installing and Removing Flat Panel Screen20 X 1/2 Screws Cord ManagementTension Screws Arm Tension AdjustmentCaracterísticas Tabla de contenido Herramientas necesarias para el ensamblajeEspañol Construcción DE LA Pared Accesorios Necesarios14 de Lista de piezas15 de 16 de Instalación en una pared con montantes de madera doblesIncorrecto Correcto 17 de18 de EN EL Caso DE LA Configuración DE MON- Taje Vesa 200 x19 de EN EL Caso DE LA Configuración DE Montaje Vesa20 de Instalación y desinstalación de la pantalla plana21 de Manejo de Cables22 de Ajuste Tensor del BrazoCaractéristiques Table des matières Outils nécessaires au montageFrançais Type DE MUR Pièces DE Fixation Requises25 sur Liste des pièces26 sur 27 sur Installation sur un mur à montant en bois simple28 sur Béton Plein Mâchefer29 sur Pour LA Configuration DE Montage Vesa 200 xPour LA Configuration DE Montage Vesa Pour LA Configuration DE MontageVesa 30 surFixation du Bouton DInclinaison au Support Mural facultatif Montage et démontage d’un écran plat31 sur 32 sur Organisation des Câbles33 sur Réglage de la tension du brasMerkmale Inhaltsverzeichnis Für den Zusammenbau erforderliche WerkzeugeDeutsch Wandkonstruktion Erforderliche BefestigungsteileTeileliste 20 X 1/2 Zoll Schrauben Anbringung an Wand Holzständerreihen 39 von Anbringung an Massivbeton oder PorenbetonsteinBEI Montagemuster Vesa 200 x AchtungBEI Montagemuster Vesa Befestigung AN PEERLESS-ADAPTERHALTER- UNG Modell PLPAnbringung und Abnahme des Flachbildschirms Anbringung des Neigungsknopfs am Wandhalter optionalKabelführung Spannungss Chrauben Einstellung der ArmspannungLimited FIVE-YEAR Warranty Garantie DE Cinq ANS