Peerless Industries SF680P, SWS510/SI, SWS510/BK manual Tools Needed for Assembly, Table of Contents

Page 2

NOTE: Read entire instruction sheet before you start installation and assembly.

WARNING

Do not begin to install your Peerless product until you have read and understood the instructions and warnings contained in this Installation Sheet. If you have any questions regarding any of the instructions or warnings, for US customers please call Peerless customer care at 1-800-865-2112, for all international customers, please contact your local distributor.

This product should only be installed by someone of good mechanical aptitude, has experience with basic building construction, and fully understands these instructions.

Make sure that the supporting surface will safely support the combined load of the equipment and all attached hardware and components.

Never exceed the Maximum Load Capacity. See page one.

If mounting to wood wall studs, make sure that mounting screws are anchored into the center of the studs. Use of an "edge to edge" stud finder is highly recommended.

Always use an assistant or mechanical lifting equipment to safely lift and position equipment.

Tighten screws firmly, but do not overtighten. Overtightening can damage the items, greatly reducing their holding power.

This product is intended for indoor use only. Use of this product outdoors could lead to product failure and personal injury.

This product was designed to be installed on the following wall construction only;

WALL CONSTRUCTION

HARDWARE REQUIRED

Wood Stud

Included

Wood Beam

Included

Solid Concrete

Included

Cinder Block

Included

Metal Stud

Do not attach except with Peerless Metal Stud Accessory Kit - ACC615;

 

 

(not evaluated by UL)

Brick

Contact Qualified Professional (not evaluated by UL)

Other or unsure?

Contact Qualified Professional

Tools Needed for Assembly

stud finder ("edge to edge" stud finder is recommended)

phillips screwdriver

drill

5/16" (8 mm) bit for concrete and cinder block wall

5/32" (4 mm) bit for wood stud wall

level

Table of Contents

 

Parts List

3

Installation to Triple Wood Stud Wall

4

Installation to Solid Concrete or Cinder Block

5

Installing Adapter Brackets

6

Installing Flat Panel Screen to Wall Plate

8

2 of 34

ISSUED: 11-09-07 SHEET #: 202-9253-4 08-31-10

Image 2
Contents Features Model # Screen Size Range Max. UL Load CapacityTools Needed for Assembly Table of ContentsAdapter Bracket Fasteners Installation to Triple Wood Stud Wall DistanceInstallation to Solid Concrete or Cinder Block View Incorrect CorrectInstalling Adapter Brackets For Flat Back Screen Mounting and Removing Flat Panel Screen DetailCaracterísticas L USEspañol Herramientas necesarias para el ensamblajeContenido Construcción DE LA Pared Accesorios NecesariosLista de piezas 11 de12 de Instalación en una pared con montantes de madera triplesDimensión 13 de Incorrecto Correcto14 de Instalación de los soportes adaptadoresNotas 15 de Montaje y desmontaje de la pantalla plana 16 deCaractéristiques Type DE MUR Pièces DE Fixation Requises Outils nécessaires au montageFrançais 18 surListe des pièces 19 sur20 sur Installation sur un mur à triples montants en boisDimension 21 sur 22 sur Installation des supports adaptateursRemarques Pour les écrans à dos plat 23 surMontage et démontage de l’écran plat 24 surMerkmale Modelle NrDeutsch Für den Zusammenbau erforderliche WerkzeugeInhaltsverzeichnis Wandkonstruktion Erforderliche BefestigungsteileTeileliste 27 vonAnbringung an Wand mit drei Holzständerreihen AbstandInstallation zu massivbeton oder porenbetonstein Falsch RichtigHinweis Anbringung von AdapterhalterungenKreuzschlitzschraubendreher an Bildschirme mit flacher Rückseite Vorsicht Anbringung und Abnahme des FlachbildschirmsLimited FIVE-YEAR Warranty Garantie DE Cinq ANS