Insignia IS-TVDVD20 manual Setting up the V-Chip

IS-TVDVD20 20-inch TV-DVD Combo.fm Page 9 Wednesday, July 27, 2005 7:28 PM

IS-TVCA206 20-inch Color TV

DVD OSD	Options
Menu
General	TV Display–Sets the aspect ratio.
Setup Page	Note: This option is only used when you
	have an external TV connected to your
	TV/DVD combo.
	You can select:
	4: 3/PS–(Pan and Scan) Fills the
	screen, but cuts off the left and right
	sides of a wide-screen formatted
	program. (Not available on all DVDs)
	4: 3/LB–(Letter Box) Select this option
	if your external TV is the standard 4:3
	screen. Wide-screen programs are
	displayed at full width with black bars
	at the top and bottom of the display.
	16: 9–Select this option if your
	external TV is a wide-screen TV. Some
	DVDs may still have black bars at the
	top and bottom of the screen.
	Angle Mark On–Selects a camera angle if
	the DVD contains multiple-angle shots.
	OSD Lang–Selects the OSD language.
	Spdif Output–Sets the audio output. You
	can select:
	Spdif Off–Analog surround sound is
	sent to the 2-CH or 5.1-CH audio out
	connectors on the back panel.
	Spdif Raw–Surround sound is sent to
	the Dolby Digital/DTS decoder through
	the coaxial connector on the back
	panel.
	Spdif PCM–Surround sound is sent to
	the Dolby Digital/DTS decoder through
	the coaxial connector on the back
	panel.
	Caption–Turns the caption on or off.
	Screen Saver–Turns the screen saver on
	or off.
Preference	Parental–Blocks and unblocks rated
Page	programs. You have to enter a password
	to access this option. The default
	password is 1234.
	Password–Changes the password. If you
	forget your password, enter 1369 as the
	old password.
	Default–Resets the DVD player to the
	factory-defaults except for the password
	and parental lock status.

Setting up the V-Chip

Your TV/DVD combo has a V-Chip installed that lets you block TV programs and movies based on their ratings.

To set up the V-Chip

1Open the OSD, then select the Parental Lock menu.

2Press the MENU button on the remote control. The password screen opens.

3Use the number pad buttons on the remote control to enter the password. The default password is 0000.

4Press the CH + or CH – button to select a menu option. You can select:

•Parental Lock–Turns the locking function on or off

•TV Rating–Blocks or unblocks TV programs based on their ratings

•MPAA Rating–Blocks or unblocks movies based on their ratings

•Lock Menu–Locks an external video source or the program on the currently selected channel.

•Change Password–Change the V-Chip password.

To turn the Parental Lock on or off:

1Open the OSD, then select the Parental Lock menu.

2Press the CH + or CH – button to select Parental Lock.

3Press the Vol + or Vol – button to turn the lock on or off.

To block and unblock TV programs based on ratings:

1Open the OSD, then select the Parental Lock menu.

2Press the CH + or CH – button to select TV Rating.

3Press the Vol + or Vol – button to open the TV Rating screen.

4Press the CH + or CH – button to select a rating, then press the Vol + or Vol – button to block (B) or unblock (U) the rating.

To block and unblock movies based on ratings:

1Open the OSD, then select the Parental Lock menu.

2Press the CH + or CH – button to select MPAA Rating.

3Press the Vol + or Vol – button to open the MPAA Rating screen.

4Press the CH + or CH – button to select a rating, then press the Vol + or Vol – button to block (B) or unblock (U) the rating.

To change the Parental Lock password:

1Open the OSD, then select the Parental Lock menu.

2Press the CH + or CH – button to select Change Password.

3Use the number pad to enter a new four-digit password.

4Use the number pad to re-enter your new password.

www.insignia-products.com 9