Insignia IS-TVDVD20 manual Installing your TV/DVD Combo, Using an antenna

IS-TVDVD20 20-inch TV-DVD Combo.fm Page 5 Wednesday, July 27, 2005 7:28 PM

IS-TVCA206 20-inch Color TV

	Button	Description	Installing your TV/DVD
			combo
24	CCD	Press to turn closed captioning for
		a TV program on or off.	Using an antenna
25	Digital selector	Press this button in combination		To enjoy a clearer picture, we recommend that
		with the number pad buttons to
				you use a CATV system or an outdoor antenna.
		change TV channels. For more
				In different places, the suitable antenna type and
		information, see “Watching a TV
		program” on page 6.		position may vary.
								VHF	UHF
26	RECALL	Press to change to the last
		channel you viewed.
27	TIME	Press to open the Time menu.
28	TV/AV	Press one or more times to select
		the video source.
29	CH +/CH –	When the OSD is closed, press
		the CH + or CH - button to change
		the TV channel. When the OSD is
		open, press to adjust options.					Antenna/CATV
							input
30	SCAN	Press to scan through the
				AC power connector
		available TV channels. Press
		again to stop scanning.
31	SLEEP	Press to set the sleep timer to		Note		We recommend that you use a 75 ohm
		automatically turn off the TV.				coaxial antenna to avoid interference.
32	Arrows	Press to make selections on the
		DVD OSD or DVD menus.		Note		To avoid interference from electrical
						signals, do not bind the antenna cable
33	PLAY/ENTER	When the OSD is closed, press to
						together with any electrical wires.
		start disc playback or resume
		normal playback. When the OSD	Installing remote control batteries
		is opened, press to confirm
		selections.		To install the remote control batteries:
34	D.MENU	Press to open the DVD menu if		1 Remove the battery cover.
		the DVD you are playing has a
		menu.
35	SUBTITLE	Press to select subtitles for a DVD
		if the DVD has subtitles.
36	SLOW	Press to playback in slow motion.
		Each time you press SLOW, the
		speed changes. Press
		PLAY/ENTER to resume normal
		playback.
37	PROGRAM	Press to enter Program mode
		when playing a disc. Use the		2 Insert two AA batteries. Make sure that the
		number pad buttons to enter the
					+/– symbols on the battery match the +/–
		program number you want, use
		the arrow button to select START.			marks inside the battery compartment.
		The program playback begins.		3 Replace the battery cover.
38	TITLE/PBC	Press to open the DVD menu if
				Tip		When the remote control will not be used
		the DVD you are playing has a
		menu. Use the number pad button				for a long period of time or when the
		to enter the item number you				batteries are worn out, remove the
		want.				batteries to prevent leakage.
39	SEARCH	Press to open the Search menu.
		Press again to select. Use the		Warning		Do not throw the batteries into fire.
		number pad buttons to enter the
						Dispose of used batteries as hazardous
		item number you want. Press
						waste.
		PLAY/ENTER to confirm you
		selection.
				Caution		Do not drop, dampen, or disassemble the
						remote control.

www.insignia-products.com 5