Icom iC-706MKTMG manual Memory and Scan Operation, Memory channels, Memory channel selection

5 MEMORY AND SCAN OPERATION

■Memory channels

The transceiver has 105 memory channels (plus 2 call channels). Memory mode is useful for quickly chang- ing to often-used frequencies.

All 105 memory channels are tuneable which means the programmed frequency can be tuned temporarily with the main dial, etc., in memory mode.

Note: During split frequency operation, programmed memory contents can be called up to the SUB readout (dot matrix portion of the display).

MEMORY	MEMORY					TRANSFER	OVER-
	CHANNEL		CAPABILITY					CLEAR
CHANNEL						TO VFO	WRITING
	NUMBER
		Independent transmit and receive
		frequencies and one mode in each
Regular	1–99	memory channel.				Yes	Yes	Yes
(split memory)		In addition, tone frequencies (or
		1750 Hz tone burst) can also be
		stored for repeater use.
	1A–3B	One	frequency	and one	mode in
Scan edges		each	memory	channel	as scan	Yes	Yes	No
	(3 pair)
		edges for programmed scan.
Call channel	C1 (144 MHz)	Same as regular, but only 144/430				Yes	Yes	No
(split memory)	C2 (430 MHz)	MHz band can be programmed.

■Memory channel selection

➀Select M2 functions.

• Push [DISPLAY] 1 or 2 times to select M.

[EXAMPLE]: Selecting memory channel 17.

• Push [MENU] one or more times to select M2.

➁Push [(F-3)V/M] to select memory mode.

➂Rotate [M-CH] to select the desired memory chan-

nel.

CW

VFO A

CHV/M

• All memory channels including blank channels can be

selected.

• [UP]/[DN] on the microphone changes the frequency.

➃To return to VFO mode, push [(F-3)V/M] again.

USB F-3

M-CH SHIFT

MEMO CH

USB S P L I T

MEMO CH

■Memory clearing

Any unnecessary memory channels can be cleared. The cleared memory channels become blank chan- nels.

➀Push [(F-3)V/M] in the M2 display to select memo- ry mode.

➁Rotate [M-CH] to select a memory channel to be cleared.

➂Push [MCL(F-2)] for 2 sec. to clear the contents.

•The programmed frequency and operating mode disap- pear and “}” appears.

➃To return to VFO mode, push [(F-3)V/M] again.

USB

S P L I T

MEMO	CH	MCL Push for
		F-2	2 sec.
	BLANK
MEMO	CH

39