Icom iC-706MKTMG manual Frequency transferring, Memory names, Calling up memory names

5 MEMORY AND SCAN OPERATION

■Frequency transferring

The frequency and operating mode can be transferred from memory mode to VFO mode.

➀Select VFO mode with [(F-3)V/M] in the M2 dis- play.

➁Select a memory channel with [M-CH].

•Select memory mode to confirm the memory channel’s contents, if desired; then return to VFO mode.

•“}” appears if the selected memory channel is a blank channel (and does not have contents). In this case transferring is not possible.

➂Push [(F-2)MÜV] for 2 sec. to transfer the frequen- cy and operating mode.

•Transferred frequency and operating mode appear in the display.

•“MÜV” does not appear in memory mode.

[EXAMPLE]: Transferring contents of memory 16.

Operating frequency: 21.320 MHz/USB (VFO)

Contents of memory 16: 14.020 MHz/CW

USB

M-CH SHIFT

VFO A

CH

USB

VFO A

S P L I T

	CH	MÜV Push for
CW
		F-2	2 sec.
	VFO A
	CH

■Memory names

All memory channels (including scan edges and the call channel) can be tagged with alphanumeric names of up to 9 characters each.

All common keyboard characters (ASCII characters 33 to 126) can be used, including numerals and punctua- tion marks.

• Calling up memory names

➀Select the G4 display.

➥Push [DISPLAY] 1 or 2 times to select G.

➥Push [MENU] one or more times to select the

G4 display.

➁Select a memory channel with [M-CH].

• Editing (programming) memory names

➀Call up the desired memory (channel) name as above.

➁Push [(F-3)É] to enter memory name edit mode.

•“name edit” appears briefly, then a flashing cursor appears under the first character position.

➂Rotate the main dial to select the desired charac- ter, then advance the cursor position.

•[(F-3)Ç] increments the cursor position; [(F-1)Å] decre- ments the cursor position.

•[(F-2)] overwrites the character with a space.

➃Repeat this procedure until all desired characters have been selected.

G4 memory name

G4É É

F-3

name edit
ÄÅÖ	Ç
ÄÅR	Ç	F-3
		Ç
ÄÅRe	Ç	F-3
		Ç

ÄÅRepeaterÖÇ MENU

➄Push [(MENU)Ä] to exit memory name edit mode.

•The G4 display reappears and the programmed memo- ry name is displayed.

G4 Repeater É

Ä

41