Sylvania 6309CCB owner manual SET UP for USE, Channel SET UP for Deleting or Adding

SET UP FOR USE

You can program the tuner to scan all the channels you receive in your area.

NOTE: Channel memory programming is NOT needed when connected to a cable box or satellite box. Just select the TV/VCR channel selector to the output channel of the cable box or satellite box (Ex CH3). Then select the channel to be viewed on the Cable Box or Satellite Box.

	CHANNEL SET UP FOR THE				DELETING (OR ADDING)
	FIRST TIME				CHANNEL
					The channels you no longer receive or seldom watch
	1 Plug in the TV/VCR power cord
					can be deleted from the memory. (Of course, you can
Attach the smaller end of the sup-
					add the deleted channel into the memory again.)
plied AC cord to the AC 120V
connector on the back of the
					1 Select “CHANNEL SET UP”
TV/VCR. Then, plug the other		AC 120V
end into a standard AC outlet.					Press the MENU button on the	– M E N U –
NOTES:					remote control.	TIMER PROGRAMMING
						PICTURE CONTROL
•	You must disconnect the car battery cord from the				Press the PLAY/K or STOP/L but-	SETTING CLOCK
						B CHANNEL SET UP
						USER’S SET UP
	TV/VCR before you use AC power.				ton to point to “CHANNEL SET	LANGUAGE [ENGLISH]
						TIME SEARCH
						ZERO RETURN
• If some digits appear in the corner of the screen,					UP”.
	press the POWER button without unplugging the				Then, press the F.FWD/B button.
	power cord.
					2 Select “ADD/DELETE CH”	– CHANNEL SET UP –
	2 Turn on the TV/VCR
					Press the PLAY/K or STOP/L but-	B ADD / DELETE CH (TV)
Press the POWER button to turn on the TV/VCR.
					ton to point to “ADD/DELETE	AUTO PRESET
					CH”.
	3 Select “ENGLISH” or “FRANÇ AIS”				Press the F.FWD/B button.
Select “ENGLISH” or				– SET UP –
“FRANÇAIS”=French using the			B	LANGUAGE	3 Enter the desired channel number
F.FWD/B or REW/s button. “[ ]”				[ENGLISH] FRANÇ AIS
				AUTO PRESET	Press the PLAY/K or STOP/L but-
indicate the selected language.
					ton until your desired channel num-
					ber appears. (You can also use the	08
					number buttons or the CHANNEL
	4 Begin auto preset					ADD / DELETE
					K/L button to enter it) (Example:
Press the PLAY/K or STOP/L but-				– SET UP –	CH8)
ton to point to “AUTO PRESET”.				LANGUAGE
Then press the F.FWD/B button.				[ENGLISH] FRANÇ AIS	4 Delete (or add) it from (into) memory
			B AUTO PRESET
The tuner scans and memorizes all
					Press the F.FWD/B or REW/s button. The channel
active channels in your area.
					number changes to light red. The channel is deleted
NOTES:
					from memory.
• The TV/VCR distinguishes between standard TV
					• To delete another channel, repeat steps [3] and [4].
	channels and cable channels.
					• If you press the F.FWD/B or REW/s button
• If you want to play or record a video tape BEFORE
					again, the channel is memorized again.
	presetting the tuner, you must press the MENU but-
	ton on the remote control. To preset the tuner again,				Added channel: Light blue.
	see “CHANNEL SET UP AGAIN” on page 14.				Deleted channel: Light red.

•The TV/VCR may recognize TV channels to be CATV channels by the receiving conditions. In this

case, try auto preset again in the fine receiving		5 Exit the channel setup mode
conditions.		Press the MENU button on the remote control to
		returns to TV mode.
5 After scanning		NOTE: To confirm that channel(s) has been deleted
The tuner stops on the lowest memorized channel.		or added, press the CHANNEL K or L button.
If you want to recall the selected channels, you can
select the desired channel directly with the remote
control number buttons or CHANNEL K or L.	- 13 -		EN

9J27