Sylvania 6309CCB owner manual Channel SET UP Again, DAYLIGHT-SAVING Time, Selecting the Language

CHANNEL SET UP AGAIN

Make sure ...

•Press the POWER button to turn on the TV/VCR.

NOTE: If for some reason the menu is in French, press the MENU button on the remote control, press the PLAY/K button to point to “LANGAGE [FRANÇAIS]”, then press the F.FWD/ B button, then press the MENU button on the remote control.

1Select “CHANNEL SET UP”

Press the MENU button on the remote control.

Press the PLAY/K or STOP/L but- ton to point to “CHANNEL SET UP”.

Then, press the F.FWD/B button.

– M E N U –

TIMER PROGRAMMING PICTURE CONTROL SETTING CLOCK

BCHANNEL SET UP USER’S SET UP LANGUAGE [ENGLISH] ZERO RETURN

TIME SEARCH

DAYLIGHT-SAVING TIME

Select this feature and the TV/VCR’s clock automati- cally will advance one hour in April, then reverse one hour in October.

When Daylight-Saving Time is ON, the clock will change automatically as follows:

2Begin auto preset

– CHANNEL SET UP –

Press the PLAY/K or STOP/L but-

ADD / DELETE CH (TV)

ton to point to “AUTO PRESET”. B AUTO PRESET Then, press the F.FWD/B button.

The tuner scans and memorizes all the active channels in your area.

3After scanning

•First Sunday of April : At 2 AM the clock imme- diately changes to 3 AM. Any timer programming you have set to occur between 2 AM and 3 AM will not record.

•Last Sunday of October : At 2 AM the clock immediately changes to 1 AM.

Make sure ...

•Press the POWER button to turn on the TV/VCR.

The tuner stops on the lowest memorized channel.

SELECTING THE LANGUAGE

Make sure ...

• Press the POWER button to turn on the TV/VCR.

NOTE: This function effects only the language on

the screen menu and not the audio source.

1Select “SETTING CLOCK”

Press the MENU button on the remote control.

Press the PLAY/K or STOP/L but- ton to point to “SETTING CLOCK”.

Then, press the F.FWD/B button.

– M E N U –

TIMER PROGRAMMING PICTURE CONTROL

BSETTING CLOCK CHANNEL SET UP USER’S SET UP LANGUAGE [ENGLISH] ZERO RETURN

TIME SEARCH

1 Select “LANGUAGE” – M E N U –

Press the MENU button on the	PICTURE CONTROL
	TIMER PROGRAMMING
remote control.	SETTING CLOCK
	USER’S SET UP
	CHANNEL SET UP
Press the PLAY/K or STOP/L but-	B LANGUAGE [ENGLISH]
	TIME SEARCH
	ZERO RETURN
ton to point to “LANGUAGE”.

2Select “ENGLISH” or “FRANÇ AIS”

Select “ENGLISH” or “FRANÇAIS”= French using the F.FWD/B or REW/s button.

3Exit the Language mode

Press the MENU button on the remote control to return to TV mode.

2Set “D.S.T.” (Daylight-Saving Time) to [ON]

Press the PLAY/K or STOP/L but-	– SETTING CLOCK –
ton to point to “D.S.T.”.	AUTO CLOCK	[ON]
Then, press the F.FWD/B or	AUTO CLOCK CH	[AUTO]
REW/s button until [ON] appears.	MANUAL CLOCK SET
	B D.S.T.	[ON]

3Exit the Daylight-Saving Time mode

Press the MENU button on the remote control to return to TV mode.

TO CANCEL THE DAYLIGHT-SAVING TIME

Repeat steps [1] to [2], select [OFF] using the F.FWD/B or REW/s button.

- 14 - EN

9J27