Pelco c649m operation manual Set the Day and Time

<MAIN MENU>

DISPLAY

TIME DATE SEARCH TIMER PROGRAM RECORDING SET UP REAR TERMINAL MAINTENANCE FIRST TIME SET UP Use JOG to select, and ENTER.

Press DISPLAY to exit.

<MAIN MENU>

DISPLAY

TIME DATE SEARCH TIMER PROGRAM RECORDING SET UP REAR TERMINAL MAINTENANCE

FIRST TIME SET UP Use JOG to select, and ENTER.

Press DISPLAY to exit.

<FIRST TIME SET UP>	STOP
TAPE END
QUASI V-SYNC	ON
TAPE LENGTH	T-120
VIDEO MODE	COLOR
PB HEAD SELECT	NORMAL
BUZZER	WRNG
TIME DATE ADJUST

<FIRST TIME SET UP>	STOP
TAPE END
QUASI V-SYNC	ON
TAPE LENGTH	T-120
VIDEO MODE	COLOR
PB HEAD SELECT	NORMAL
BUZZER	WRNG
TIME DATE ADJUST
<TIME DATE ADJUST>
DAYLIGHT SAVINGS	OFF
MONTH	01
DATE	01
YEAR	97
TIME	00 :00 : 00
<TIME DATE ADJUST>
DAYLIGHT SAVINGS	OFF
MONTH	01
DATE	01
YEAR	97
TIME	00 :00 : 00
<TIME DATE ADJUST>
DAYLIGHT SAVINGS	OFF
MONTH	01
DATE	01
YEAR	97
TIME	00 :00 : 00

6.10.2Set the Day and Time

1.Press the DISPLAY button to display the Main menu on the monitor.

2.Turn the JOG dial to select FIRST TIME SET UP.

3.Turn the SHUTTLE ring to the right. The First Time Set Up menu will appear.

4.Turn the JOG dial to select TIME DATE ADJUST.

5.Turn the SHUTTLE ring to the right. The Time Date Adjust menu will appear.

6.Do the following to advance the clock by one hour and set Daylight Savings to ON:

Turn the SHUTTLE ring to the right. The DAYLIGHT SAVINGS display will flash. Turn the JOG dial to select ON.

•The clock advances by one hour and the Daylight Savings Time symbol () will be displayed next to the present time display.

•To cancel Daylight Savings Time, switch DAYLIGHT SAVINGS to OFF.

NOTE: If power goes out while Daylight Savings Time is selected, the power failure mark “X” will replace the Daylight Savings Time symbol. When the power failure mark “X” disappears, the Daylight Savings Time symbol () will reappear.

28 Pelco Manual C649M (7/99)