![](/images/new-backgrounds/1278522/27852251x1.webp)
ALL MENU Turn the SHUTTLE ring to the right and the words ALL MENU
INITIALIZE INITIALIZE will be displayed. When you turn the SHUTTLE ring to the left, all settings (except the TIMER RECORDING setting) will be cleared. Turn the SHUTTLE ring to the right to return to the Maintenance menu.
POWER LOSS Turn the SHUTTLE ring to the right and the words POWER
LIST CLEAR LOSS LIST CLEAR will be displayed. When you turn the SHUTTLE ring to the left, the list will be cleared. Turn the SHUTTLE ring to the right to return to the Maintenance menu.
ALARM LIST Turn the SHUTTLE ring to the right and the words ALARM LIST
CLEAR CLEAR will be displayed. When you turn the SHUTTLE ring to the left, the list will be cleared. Turn the SHUTTLE ring to the right to return to the Maintenance menu.
6.10 FIRST TIME SET UP MENU
<FIRST TIME SET UP> | STOP |
TAPE END | |
QUASI | ON |
TAPE LENGTH | |
VIDEO MODE | COLOR |
PB HEAD SELECT | NORMAL |
BUZZER | WRNG |
TIME DATE ADJUST |
|
Figure 15. First Time Set Up
Menu
NOTE: Some multiplexers may re- quire Quasi
TAPE END | Sets the VCR’s state of operation when the tape runs out during |
| recording. The default is STOP. |
| • STOP – The tape stops. “End” appears on the fluores- |
| cent display and “Tape End” on the monitor. When CALL |
| OUT is set to WRNG•TAPE END, a call signal is output |
| from the CALL terminal. |
| • REWIND – Rewinds the tape to the beginning and stops |
| (except during timer recording). When CALL OUT is set |
| to WRNG•TAPE END, a call signal is output for two sec- |
| onds from the CALL terminal. |
| • REPEAT – Rewinds the tape to the beginning and re- |
| sumes recording. |
| • ALARM•PROT – (Alarm Protection) If alarm recordings |
| are on the tape, then the tape stops. “End” appears on |
| the fluorescent display and “Tape End” on the monitor. |
| When CALL OUT is set to WRNG•TAPE END, a call sig- |
| nal is output from the CALL terminal. If there are no alarm |
| recordings, the tape is rewound and recording continues. |
QUASI
•ON – Quasi
•OFF – Quasi
TAPE LENGTH Sets the tape length to match the tape so the tape remaining
indicator works correctly. Set as follows:
•
•
VIDEO MODE Set as follows:
•COLOR — Select for color recording or playback.
•B/W — Select for black and white recording or playback.
26 | Pelco Manual C649M (7/99) |