9.2.3 | Still Picture | ||
NOTE: A few noise bars or verti- |
|
| You can get a still picture by pressing the PAUSE/SHUTTLE HOLD button during |
| |||
cal movement may appear during |
|
| playback. Press it again to resume normal playback. |
still playback. | 9.2.4 |
|
NOTES:
•Noise bars may appear on the picture when switching between forward and reverse playback.
•A few noise bars or vertical move- ment may appear during frame-
You can use the JOG dial to advance the tape frame by frame.
1.While the VCR is playing the tape, press the PAUSE/SHUTTLE HOLD button to freeze the picture.
2.Slightly rotate the JOG dial clockwise to advance the tape, or counterclock- wise to reverse the tape. To get a continuous
3.Press the PLAY button to resume normal playback.
9.3 LOCATING THE START OF ALARM RECORDINGS
The VCR automatically inserts an index signal at the beginning of each alarm re- cording, so the start of each alarm can be located.
9.3.1 Index Search
During fast forward or rewind, the VCR will search for alarm index signals. When it finds one, it plays back the tape and stays in still mode.
1.Press the COUNTER MEMORY/SKIP/INDEX button to illuminate INDEX on the fluorescent display. The number indicator will also be illuminated.
2.Turn the JOG dial to display the number
3.Turn the SHUTTLE ring to the right (forward direction) or left (reverse direc- tion). The index number will decrease as each index signal passes. (The in- dex signal may be hard to find in some recording conditions.)
|
| Present position |
|
| |
| Rewind direction | Fast forward direction |
| ||
ALARM | ALARM | ALARM | ALARM | ALARM | |
RECORD- | |||||
RECORDING | RECORDING RECORDING | RECORDING | |||
ING | |||||
|
|
|
| ||
+1 | +2 | +15 | |||
Figure 28. Index Searching
44 | Pelco Manual C649M (7/99) |